Panasonic WX-CH2050A Headphones User Manual


 
13
SPECIFICATIONS
Operating Frequency: UHF/FM
Type of Radio Wave: F3E
Required Power Supply: Rechargeable Li-ion Battery, 3.7 VDC, normal type or long life type
Control Function: Power (On/Off)
Volume (Up/Down)
Talk
Page
Channel Selection (A/B)
Channel Group Selection (1-8)
DIP Switch Setup (8 bit)
Dimensions: 140 mm(W) x 240 mm(H) x 84 mm (D)
5-1/2" (W) x 9-7/16" (H) x 3-5/16" (D)
Weight (excluding battery): 160
g (0.35 lbs)
STANDARD ACCESSORIES
Windproof Cushion ........................................................... 1 pc.
Strap.................................................................................. 1 pc.
Miniature Screwdriver ....................................................... 1 pc.
Head protector.................................................................. 2 pcs.
OPTIONAL ACCESSORIES
Long Life Battery (Li-ion 3.7 VDC, 1 500 mA/h)................ 2050BAT
Standard Battery (Li-ion 3.7 VDC, 1 035 mA/h)................ 2051BAT
Battery Charger................................................................. 2050CH
TROUBLESHOOTING
Phenomenon
The power indicator blinks in red.
The power indicator lights up in red.
Cannot turn on the headset.
Cannot communicate with other
store personnel or the customer at
the menu board.
Cannot hear or talk to the customer,
while communications with the store
personnel are OK.
Cannot "page" or "talk" in certain
areas.
A constant beep is always heard in
the headset when the "page" or
"talk" button is pressed.
Possible Cause
A wrong channel is selected.
The battery power is nearing its end.
The battery is exhausted.
The battery is not inserted correctly.
The center module may be turned off.
The vehicle detector may malfunction
because it is not plugged into the
center module, no power is supplied,
or the detecting function is out of
order.
Radio wave intensity is insufficient in
the areas.
The "page" or "talk" button on one of
the units may be kept depressed.
What to do
Select any of channels 1 through 8.
If no remedy exists, consult your dealer
for repairs.
Recharge the battery.
Recharge the battery.
Position the battery properly.
Turn on the power switch of the center
module. If no remedy exists, consult your
dealer for repairs.
Check that the vehicle detector is
plugged in and is supplied power.
If no remedy exists, consult your dealer
for repairs.
Remove any metal obstacles blocking
radio waves, or extend the transmission
antennas.
Turn off the units one by one while
listening to the beep. You can identify the
faulty unit through the process of the
elimination of the units. Consult your
dealer for repairs.