Filter
Top Products
11
OPERATING PROCEDURES
Notes:
• Transmission using the button T or P is allowed for a
single headset at a time. A continuous beep or distort-
ed sound will be heard in a headset that tries to trans-
mit while another person is operating.
• Maintain a distance of more than 0.3 m (1 ft) between
the headset and the order taker, or more than 1 m (3 ft)
between the headset and the center module.
● Preparations
Prior to operating the headset, confirm that the system
setup for the headset, center module, and other devices
has been completed.
1. Hook the tabs of the strap to the two strap buttons on
the headset. There are two strap buttons on the head-
set: one is at the lower part of the head pad, and the
other is behind the ear cushion.
2. Attach the supplied head protectors under the head
band as needed.
3. Install a battery in the battery compartment, referring to
p. 6 BATTERY LOADING & REPLACEMENT.
4. Wear the headset, and route the strap behind your
neck.
5. Adjust the head pad so that the earphone is placed on
your ear.
6. Rotate and bend the microphone boom so that the
microphone is placed near your mouth.
7. Hold down the power button for two seconds to turn on
the headset.
A
/
B
V
O
L
.
Head protector
Strap
A
/
B
V
O
L
.
q
e
w
A
/
B
V
O
L
.