Panasonic WJ-HD716K/G CD Player User Manual


  Open as PDF
of 133
 
58
Suspend the alarm action
Configure the settings to not to perform the alarm action even when an event occurs.
It is useful to suspend the alarm action for a certain period such as when configuring the settings of the record-
er.
However, recording filing of event logs, preset position function and alarm occurrence indication (on monitor)
will be performed even though the alarm action is being suspended.
Step 1
Press the [ALARM RESET] button and the [SET] but-
ton on the front panel simultaneously.
→ The alarm action will be suspended. The alarm
suspension indicator will light.
Step 2
To cancel the alarm suspension, press the [ALARM
RESET] button and the [SET] button simultaneously
again.
→ The alarm suspension will be canceled and the
alarm suspension indicator will go off.
Important:
• Itisimpossibletosuspendalarmactionsusing
the mouse.
Note:
• Itispossibletodisablethealarmactionsbycon-
necting an external switch to the ALARM/
CONTROL connector (pin no. 22: alarm suspen-
sion input terminal) on the rear of the recorder.
When setting the external switch to "On", the
alarm action will be suspended. To cancel the
alarm suspension, set the external switch to "Off".
Cancel the error action
When an error (trouble) occurred on the recorder, the recorder will take the error action. To cancel the error
action, press the [ALARM RESET] button on the front panel or click the error icon on the status bar displayed
on monitor 2.
Note:
• Dependingontheerrortype,theerrorindicationbythestatusindicatoronthefrontpanelwillnotgooff
even when canceling the error action.
 previous next