Filter
Top Products
39
Operation using the buttons on the front panel
Step 2
To stop the playback, press the [STOP] button.
→ The[PLAY/PAUSE]buttonwillgooffandplayback
will stop. Playback on monitor 2 will be switched
to live image display.
Operations using a mouse
Step 3
Click the [Play] button.
→ Playback will start.
The playback start point varies depending on how
many times playback is performed after the login as
follows.
• Thefirstplaybackafterloggingintothe
recorder
The latest recorded image will be played. The
playback start point can be set on the setup menu
("Latest image position" on the "Basic" tab under
"Basic") (☞ Installation Guide). "30 seconds
before the latest" is selected at the default.
• Otherthanabove(Thesecondandsubsequent
playback after logging in to the recorder.)
Playback will start from the point at which the last
playback was stopped (time and date).
Step 4
To stop playback, press the [Stop] button.
→ Playback will stop.
Playback on monitor 2 will be switched to live
image display.