Panasonic WJ-HD716K/G CD Player User Manual


  Open as PDF
of 133
 
124
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a
problem is not described below.
Symptom Cause/solution
Reference
pages
Cannot access from the
browser.
• IstheEthernetcablefirmlyconnectedtothe10BASE-
T/100BASE-TX port?
Confirm the cable is firmly connected.
_
• Istheconnectionindicatorofthe10BASE-T/-100BASE-
TX port lit?
When it is not lit, connection to a LAN is not established
or a network is not working correctly.
Confirm that the connection indicator of the 10BASE-
T/100BASE-TX port is lit. Refer to the system adminis-
trator if it is not lit.
_
• IsthevalidIPaddressset?
Refer to a system administrator for further information
about the settings.
Installation
Guide
• AreyouaccessingthewrongIPaddress?
Check the connection as follows:
>ping "IP address of this recorder"
If there is reply from the recorder, the connection is nor-
mal. If not, check the settings of the IP address and the
subnet mask.
_
• IsthesameIPaddressprovidedtootherdevices?
Refer to a system administrator for further information
about the settings.
Installation
Guide
• Aretherecontradictionsbetweentheaddressandthe
network subnet to be accessed?
When the recorder and the client (PC) are on the same
subnet, is the same subnet set for the IP addresses of
the recorder and the PC?
Or is "Use Proxy Server" for the settings of the browser
checked?
When accessing the recorder in the same subnet, enter-
ing the address of the recorder in the "Don’t Use Proxy
For These Addresses" box is recommended.
Installation
Guide
 previous next