Filter
Top Products
52
Step 1
Press the [SEARCH] button on the front panel.
→ The recording event list window will be displayed.
Step 2
Move the cursor onto the [VMD] tab, and then press
the [SET] button on the front panel.
→ The "VMD" tab page will be displayed.
Step 3
Designate the search filters.
Move the cursor onto the [VMD search] button, and
then press the [SET] button on the front panel.
→ The search filter window will be displayed.
Step 4
Specify the VMD search conditions.
When the [SET] button is pressed after moving the
cursor onto a button relating to a search condition,
the setup window respective to the selected search
condition.
When completing the VMD search condition setting,
press the [SET/ESC] button to close the search filter
window.
Select camera channels
Move the cursor onto the [Ch] button, and then press
the [SET] button.
→ The camera channel setup menu will be dis-
played.
To select a camera channel, rotate the jog dial
(inside).
How to operate