Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 133
 
77
Display the operation window
Step 1
Start the web browser.
Step 2
Enter the IP address or URL assigned to the recorder
into the [Address] box, and then press the [Enter] key.
→ The authentication window will be displayed. The
authentication window will not be displayed when
"Off" is selected fro "User authentication" on the
[Basic] tab of "User mng." of the setup menu.
Important:
• Refertoasystemadministratorforfurtherinfor-
mation about the set IP address.
• ItisimpossibletoaccesstherecorderfromaPC
whose IP address is not registered in the recorder
when "On" is selected for "Host authentication"
on the [Basic] tab of "User mng." of the setup
menu. Refer to a system administrator for further
information.
• Donotattach"0"beforethenumberswhenenter-
ing IP address.
Example:
b
192.168.0.50
X 192.168.0.050
• Ifamessageisdisplayedontheinformationbar,
see page 127.
Note:
• Whendisplayingthetoppageoftheoperation
window of the recorder on a PC for the first time,
the wizard for ActiveX installation required to dis-
play images from cameras will be displayed.
Follow the instructions of the wizard to complete
the installation.
• WhenanyActiveXforPanasonic’sdigitaldisk
recorder other than this product is already
installed, uninstall "WebVideo ActiveX" from "Add
or Remove Programs" in "Control Panel" and then
install ActiveX for this product.
• Whentheinstallationwizardisdisplayedeach
time displaying other page even though installa-
tion of ActiveX for this product has been complet-
ed, reboot the PC.
Step 3
Enter the user name and password registered in the
recorder, and then click the [Login] button.
→ The top page will be displayed.
Important:
• Refertoasystemadministratorforthesetuser
name and password.
• RefertotheInstallationGuideforhowtoregister
users.
• Thedefaultadministratornameandpasswordare
as follows.
Administrator name: ADMIN
Password: 12345
• Toenhancethesecurity,changetheadministrator
name and password before running the recorder.
Change the password periodically.
Refer to the Installation Guide for how to change
the password.
• Refertopage127whenamessageisdisplayed
on the information bar or when an unnecessary
status bar or scroll bar is displayed on the pop-up
window.
Boot the PC and operate the recorder using a web browser.
 previous next