Panasonic WJ-HD716K CD Player User Manual


  Open as PDF
of 133
 
21
Move the position of a panel
It is possible to move a panel to the other corner of
the screen by rotating the jog dial (inside). When
rotating the jog dial (inside) clockwise, the panel will
move to the next corner in order clockwise. When
rotating the jog dial counterclockwise, it will move
counterclockwise.
Operations on panels
Panels can be operated by pressing buttons on the
front panel including the arrows button (C, D, A, B).
Example: When operating the El-zoom panel
• Enlargeimagesfromthecamerausingtheelec-
tronic zoom
Each time the [SET] button is pressed, the zoom
factor will change between x2, x4 and x1.
• Movethedisplayareaofimagesfromcameras
When the zoom factor is x2 or x4, it is possible to
move the image display area by pressing the
arrows button (C, D, A, B).
Close the panel
Press the [SETUP/ESC] button.
Operations of the software keyboard for time and date entry
When it is necessary to designate time and date such as when searching for a recording event, use the soft-
ware keyboard for time and date entry that can be displayed by pressing the [SET] button after moving the cur-
sor onto the time and date entry field.
Step 1
Movethecursorontoeachentryfield(year,month,
day, time) using the arrows button (C, D, A, B), and
select values for them using the jog dial (inside).
→ When the time and date are set, the date mark on
the calendar will move to the appropriate position.
Step 2
Movethecursorontothe[Enter]buttonusingthe
arrows button (C D A B), and then press the [SET]
button.
→ The set time and date will be applied and the soft-
ware keyboard for time and date entry will close.
Note:
• Whenthe[SET]buttonispressedaftermovingthe
cursor onto the [Current time] button, the current
time and date will be entered.
The software keyboard for time and date entry can be operated as follows.
 previous next