Filter
Top Products
RQT6558
RQT6558
Operating Instructions
Operating Instructions
TRACK ERASE
Erase one track at a time.
Refer to the illustration on page 44 of the
Japanese text.
1
Press [EDIT] while stopped.
2
Press [
M
s r
L
, VOL/CURSOR] to
select “TRACK ERASE?”.
3
Press [ENTER, USB ON/OFF].
Now the display is in the track selection mode.
4
Press [
M
s r
L
, VOL/CURSOR] to
select the track to erase.
5
Press [ENTER, USB ON/OFF].
The display asks you to confirm your
selection.
6
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 6.
COMBINE
(Combining 2 tracks)
Remove a track mark from between two
tracks, effectively making them one track.
Refer to the illustration on page 45 of the
Japanese text.
1
Press [EDIT] while playing the latter of
the two tracks you want to combine (or
while paused).
2
Press [
M
s r
L
, VOL/CURSOR] to
select “COMBINE?”.
3
Press [ENTER, USB ON/OFF].
The display asks you to confirm your
selection. In the example, the last eight
seconds of track 2 and the first eight
seconds of track 3 play repeatedly.
(16
seconds if the track is monaural or recorded with
LP2, 32 seconds if the track is recorded with LP4)
4
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 4.
Note
≥
The combined track takes the title of the
former of the two tracks.
≥
COMBINE does not work while playing track 1.
≥
You cannot combine tracks recorded using
different modes (monaural, normal stereo,
LP2, and LP4).
Operation
Operation
GROUP (Grouping tracks)
You can do the following
≥
Group set
Group together successive tracks and give
groups titles
≥
Group title
Change group titles
≥
Group release
Release tracks from a group
Refer to the illustration on pages 46 to 49
of the Japanese text.
1
Press [EDIT] while stopped.
2
Press [
M
s r
L
, VOL/CURSOR] to
select “GROUP?”.
3
Press [ENTER, USB ON/OFF] .
Now the display is in the function selection
mode.
4
1
Press [
M
s r
L
, VOL/CURSOR] to
select the function.
1
The mode changes each time the button
is pressed.
SET?
(-----------------------------------]
;|
TITLE?
|
;|
RELEASE?
-----------------------------}
2
Press [ENTER, USB ON/OFF] .
1
Refer to operation you selected.
≥
GROUP SET
After step 4 above
The display is ready for you to select the first
track in the group.
5
Press [
M
s r
L
, VOL/CURSOR] to
select the first track.
6
Press [ENTER, USB ON/OFF].
The display is ready for you to select the
last track in the group.
7
Press [
M
s r
L
, VOL/CURSOR] to
select the last track.
8
Press [ENTER, USB ON/OFF].
The number of the new group is displayed.
After 2 seconds
After 2 seconds
The text editing mode is entered.
9
Enter the title. (See pages 92 to 93.)
10
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 10.
Operation
;
;
Operating Instructions
MOVE (Moving tracks)
Rearrange the order of the tracks.
Refer to the illustration on page 42 of the
Japanese text.
1
Press [EDIT] while stopped.
2
Press [
M
s r
L
, VOL/CURSOR] to
select “MOVE?”.
3
Press [ENTER, USB ON/OFF].
Now the display is in the mode to select
track to be moved.
4
Press [
M
s r
L
, VOL/CURSOR] to
select the track to be moved.
5
Press [ENTER, USB ON/OFF].
Now the display is in the mode to select the
new position.
6
Press [
M
s r
L
, VOL/CURSOR] again
to select the new position.
7
Press [ENTER, USB ON/OFF].
The display asks you to confirm your
selection.
8
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 8.
ALL ERASE
(Erasing tracks)
Erase all the tracks on the MD.
Refer to the illustration on page 43 of the
Japanese text.
1
Press [EDIT] while stopped.
2
Press [
M
s r
L
, VOL/CURSOR] to
select “ALL ERASE?”.
3
Press [ENTER, USB ON/OFF].
The display asks you to confirm your
selection.
4
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
(“BLANK DISC” appears on the display.)
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 4.
Note
ALL ERASE cannot be used while the disc is
playing or paused.
Operation
Operation
Editing MDs
DIVIDE
(Dividing a track into two)
This allows you to add track marks, making it
easy to divide a classical piece into its
separate movements, for example.
Refer to the illustration on page 41 of the
Japanese text.
1
Press [EDIT] during play.
2
Press [
M
s r
L
, VOL/CURSOR] to
select “DIVIDE?”.
3
Press [ENTER, USB ON/OFF] at the
point you want to divide the track.
A 4 second segment (8 seconds if the track
is monaural or recorded with LP2, 16
seconds if the track is recorded with LP4)
of the track is played repeatedly, beginning
at the point selected.
∫
To adjust the point
Press[
M
s r
L
, VOL/CURSOR] to adjust
the point.
Adjustments can be made approximately 8
seconds (16 seconds if the track is monaural
or recorded with LP2, 32 seconds if the track
is recorded with LP4) either side of the original
point. (
-
128 to +127)
4
Press [ENTER, USB ON/OFF].
The display asks you to confirm your
selection.
5
Press [ENTER, USB ON/OFF].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an editing
operation
Press [EDIT] before confirming the operation
in step 5.
Note
≥
If you divide a track with a title, the latter
track becomes untitled.
≥
DIVIDE cannot be used while the unit is
stopped.
Operation