Refer to the illustration on pages 37 to 39
of the Japanese text.
∫
Adjusting the display’s contrast
When the unit is powered on:
1
Put the main unit in hold (See the
illustration on the page 16 of the
Japanese text.) .
2
1
Press and hold [
1
;
] on the main
unit and ...
2
2
Press [VOL
s r
].
2
Press [
r
,
s
].
2
By pressing
j
or
i
the contrast will
change gradually. Setting can be made
in the range as follows.
2
Main unit:
0 (light) to 29 (dark)
2
Remote control:
0 (light) to 15 (dark)
2
: darker, : lighter
∫
To light the display of the remote
control
The display lights for about 5 seconds when
an operation is done on the remote control. It
remains lit for up to 20 seconds while a track
or disc title is scrolling on the screen.
∫
Checking the display of the remote
control
Press [
$
LIGHT/
%
DISP
].
The display lights for 5 seconds.
∫
The operation tone of the remote
control
A tone sounds when a button on the remote
control is pressed.
The tone can be turned on and off.
When the unit is powered on:
1
Put the main unit in hold (See the
illustration on page 16 of the Japanese
text.) .
2
1
Press and hold [
1
;
] on the main
unit and ...
2
To turn on
2
Press and hold [
1
/
∫
] until “Beep ON”
appears.
2
To turn off
2
Press and hold [
1
/
∫
] until “Beep OFF”
appears.
Change the display
Press and hold [
$
LIGHT/
%
DISP] when
the unit is stopped or playing.
Note
≥
“ ” indicates group names.
≥
“ ”indicates disc names.
≥
“NO TITLE” (“ ” on the remote
control) appears when a track, group, or disc
has no title.
Disc mode
The display changes each time this is done to
show the track title, the disc title, playing time
of all tracks, total numbers of tracks, elapsed
playing time and the track number.
Group mode
The display changes each time this is done to
show the track title, the group title, overall
group playing time, overall number of tracks in
group, group track number and elapsed
playing time.
Disc mode
The display changes each time this is done to
show the remaining playing time, remaining
recording time, the disc title, playing time of all
tracks, total numbers of tracks, elapsed
playing time, the track number and the track
title.
Note
The remaining recording time shown
corresponds to the recording mode (normal,
LP2, or LP4) currently selected.
Group mode
The display changes each time this is done to
show the remaining playing time, the group
title, overall group playing time, overall
number of tracks in group, group track number
, elapsed playing time and the track title.
RQT6558
Operating Instructions
Operating Instructions
RQT6558
Repeat and Random play
Press [MODE] when the unit is stopped or
playing.
Press [PLAY MODE] when the unit is
stopped or playing.
The mode changes each time the button is
pressed.
1 track repeat (1-
`
)
(---------------------------]
One track is played over and over.
|
;|
All track repeat (
`
)
|
All tracks on the disc (or on the group while
|
the unit is in the group mode) are repeated.
|
;|
Random (RANDOM) (main unit)
|
Random (RND) (remote control)
|
All tracks on the disc (or on the group
|
while the unit is in the group mode) are
|
played randomly once each then the
|
unit stops automatically.
|
;|
|
Intro-scan memory (INTRO or MEMO)
|
;|
Normal (no indicator is shown)
----------------------}
Note
≥
“INTRO” and “MEMO” are only displayed
while stopped in the disc mode.
≥
When using all tracks repeat, you may skip,
fast forward or rewind from the first song on
the disc (or on the group) to the last (and
vice versa) even during playback.
≥
During random play, it is not possible to skip
or rewind to a track that has already been
played.
≥
When changing discs or changing group
mode (see left), please reset settings.
Main unit
Remote control
Main unit
Remote control
Other useful functions
Remote control only
Remote control only
Remote control
Main unit
Operating Instructions
∫
When listening through the
speakers
When the AC adaptor is used as the power
source it is possible to change settings as
follows:
XBS-SP
(-------------------------------------------------------------]
Increases the power of
|
the bass sounds.
|
;|
NORMAL (Cancel)
----------------------------------------}
Note
You cannot change sound quality during intro-
scan or if “MEMO” is displayed while stopped.
Listening in the group mode
Discs that have been given a group setting
(the tracks on the disc have been arranged
into a number of groups) allow the listener to
select a group and enjoy continuous play of all
the songs in that group.
First set the groups. (See page 91.)
1. Press and hold [PLAY MODE] while
stopped to select “GROUP ON” (group
mode).
(“GRPON” on the remote control’s
display)
The group mode and disc mode changes
each time the button is pressed.
GROUP ON()GROUP OFF (main unit)
GRPON()GRPOFF (remote control)
2.
Press and hold [
:,
9
]
to select the
group you want to listen (group skip).
If you continue to press the button the
group changes successively.
3.
Press [
1
;
] to start play.
Press [
1
/
∫
] to start play.
Play will continue to the last song of the
selected group and stop.
Note
≥
The first song of each group will be indicated
by the track number “1”.
≥
If “INTRO” or “MEMO” are displayed [refer to
intro-scan memory playback (see page 87)]
on the remote control while play is stopped,
group mode cannot be used.
≥
For discs not assigned a group setting “NO
GROUP” (on the remote control “NO GRP”)
will be displayed.
Remote control only
Main unit
Remote control
Main unit
Remote control
∫
To skip in the group
Press [
:
,
9
] during play.
∫
To search in the group
Press and hold [
:
,
9
] during play.
∫
To listen from a selected track in
the group
1 Press [
:
,
9
]
while stopped.
Forward : [
9
] Backward : [
:
]
2 Press [
1
;
] (main unit) or [
1
/
∫
] (remote
control) to start the play.
Play starts from the selected track and plays
through to the final track in the group.