Filter
Top Products
RQT5997
ENGLISH
RQT5997
Operating Instructions
Operating Instructions
TRACK ERASE
Erase one track at a time.
Refer to the illustration on page 48 of the
Japanese text.
1
Press [EDIT, MARK MODE] while
stopped.
2
1
Press [
:
,
9
] to select “TRACK
ERASE?”.
2
Press [ENTER].
Now the display is in the track selection mode.
3
1
Press or swipe [
:
!
,
#
9
] to
select the track to erase.
2
Press [ENTER].
The display asks you to confirm your
selection.
4
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an
editing operation
Press [
∫
OPR OFF] before confirming the
operation in step 4.
COMBINE
(Combining 2 tracks)
Remove a track mark from between two
tracks, effectively making them one track.
Refer to the illustration on page 49 of the
Japanese text.
1
Press [EDIT, MARK MODE] while
playing the latter of the two tracks you
want to combine (or while paused).
2
1
Press [
:
,
9
] to select
“COMBINE?”.
2
Press [ENTER].
The display asks you to confirm your
selection. In the example, the last eight
seconds of track 2 and the first eight
seconds of track 3 play repeatedly.
(16
seconds if the track is monaural or recorded with
LP2, 32 seconds if the track is recorded with LP4)
3
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an
editing operation
Press [
∫
, OPR OFF] before confirming the
operation in step 3.
Note
≥
COMBINE does not work while playing
track 1.
≥
You cannot combine tracks recorded using
different modes (monaural, normal stereo,
LP2, and LP4).
Operation
Operation
GROUP (Grouping tracks)
You can do the following
≥
Group set
Group together successive tracks and give
groups titles
≥
Group title
Change group titles
≥
Group release
Release tracks from a group
Refer to the illustration on pages 50 to 54
of the Japanese text.
1
Press [EDIT, MARK MODE] while
stopped.
2
1
Press [
:
,
9
] to select
“GROUP?”.
2
Press [ENTER] .
Now the display is in the function
selection mode.
3
1
Press to select the function.
The mode changes each time the button
is pressed.
SET?
;
TITLE?
;
RELEASE?
2
Press [ENTER] .
Refer to operation you selected.
≥
GROUP SET
After step 3 above
The display is ready for you to select the first
track in the group.
4
1
Press or swipe [
:
!
,
#
9
] to
select the first track.
2
Press [ENTER].
The display is ready for you to select the
last track in the group.
5
1
Press or swipe [
:
!
,
#
9
] to
select the last track.
2
Press [ENTER].
The number of the new group is
displayed.
After 2 seconds
After 2 seconds
The text editing mode is entered.
6
Enter the title. (See page 86.)
7
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an
editing operation
Press [
∫
, OPR OFF] before confirming the
operation in step 7.
Operation
MOVE (Moving tracks)
Rearrange the order of the tracks.
Refer to the illustration on page 46 of the
Japanese text.
1
Press [EDIT, MARK MODE] while
stopped.
2
1
Press [
:
,
9
] to select “MOVE?”.
2
Press [ENTER].
Now the display is in the mode to select
track to be moved.
3
1
Press or swipe [
:
!
,
#
9
] to
select the track to be moved.
2
Press [ENTER].
Now the display is in the mode to select
the new position.
4
1
Press or swipe [
:
!
,
#
9
]
again to select the new position.
2
Press [ENTER].
The display asks you to confirm your
selection.
5
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
To stop part way through an editing
operation
Press [
∫
, OPR OFF] before confirming the
operation in step 5.
ALL ERASE
(Erasing tracks)
Erase all the tracks on the MD.
Refer to the illustration on page 47 of the
Japanese text.
1
Press [EDIT, MARK MODE] while
stopped.
2
1
Press [
:
,
9
] to select “ALL
ERASE?”.
2
Press [ENTER].
The display asks you to confirm your
selection.
3
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
(“BLANK DISC” appears on the display.)
∫
To stop part way through an
editing operation
Press [
∫
, OPR OFF] before confirming the
operation in step 3.
Note
ALL ERASE cannot be used while the disc is
playing or paused.
Operation
Editing MDs
DIVIDE
(Dividing a track into two)
This allows you to add track marks, making
it easy to divide a classical piece into its
separate movements, for example.
Refer to the illustration on page 45 of the
Japanese text.
1
Press [EDIT, MARK MODE] during play.
2
1
Press [
:
,
9
] to select
“DIVIDE?”.
2
Press [ENTER] at the point you want
to divide the track.
A 4 second segment (8 seconds if the
track is monaural or recorded with LP2,
16 seconds if the track is recorded with
LP4) of the track is played repeatedly,
beginning at the point selected.
∫
To adjust the point
Press or swipe [
:
!
,
#
9
] to adjust
the point.
Adjustments can be made approximately 8
seconds (16 seconds if the track is monaural
or recorded with LP2, 32 seconds if the track
is recorded with LP4) either side of the
original point. (
-
128 to +127)
3
Press [ENTER].
The display asks you to confirm your
selection.
4
Press [EDIT, MARK MODE].
When “UTOC Writing” goes out editing is
complete and the unit stops.
∫
To stop part way through an
editing operation
Press [
∫
, OPR OFF] before confirming the
operation in step 4.
Note
≥
If you divide a track with a title, the latter
track becomes untitled.
≥
DIVIDE cannot be used while the unit is
stopped.
Operation
Operation
;
;