Filter
Top Products
7
VQT5F18
Getting started
Setting up the system
Follow the “Owner’s Manual <Setup>” to set up
the system first.
∫ Speakers
≥
Keep your speakers at least 10 mm away from the
system to avoid noise generated by resonance.
≥ For optional wall mount, refer to page 17.
≥ When you place all the speakers in a row at the
front, set “5.1ch Front Layout” to “On”. (> 16)
Centre speaker
≥ Put it on a rack or shelf not to interfere with the
TV’s various sensors (ambient light, etc.).
Vibration caused by the speaker can disrupt the
picture if it is placed directly on the TV.
Surround speakers
≥ Place the speakers at the same height or higher
than ear level.
∫ HDMI
≥ If you use an optional HDMI cable, use the
ARC* compatible High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters or less.
* ARC is an abbreviation of Audio Return Channel, also
known as HDMI ARC. This feature allows a home theatre
system to receive and play audio from the TV through a
single HDMI cable without additional wiring.
∫ DIGITAL AUDIO IN
≥ The dual audio cannot be changed. Change the
setting on the connected device.
∫ VIDEO OUT
≥ Do not make the video connections through
the VCR.
Due to copy guard protection, the picture may
not display properly.
∫ AC mains lead
≥ This unit consumes a small amount of AC
power (> 22) even when turned off in standby
mode. For the purpose of energy conservation,
the unit should be disconnected if you will not
be using it for extended period of time.
Precautions
2 AC mains leads are supplied.
Use the AC mains lead that matches the socket
for the area you live in.
≥ Saudi Arabia: 3-pin AC mains lead
Other device connection
OPTICAL
OUT
Optical digital audio cable
(not supplied)
Set Top Box, etc.
SC-XH385&333GSGA-VQT5F18_mst.book 7 ページ ２０１４年３月１０日 月曜日 午後２時０分