Filter
Top Products
11
VQT5F18
Basic operations
Enjoying Bluetooth
®
∫ Restrictions of use
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Usage with all Bluetooth
®
devices is not
guaranteed.
≥ Depending on the specifications and settings of
a device, it can fail to connect or some
operations can be different.
≥ This system supports Bluetooth
®
security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data wirelessly
to this system with caution.
≥ This system cannot transmit data to a
Bluetooth
®
device.
≥ The environment, obstacles, and interference
may shorten the communication range or cause
incorrect operation, such as audio interruptions.
≥ Do not use this system near an equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc).
By using the Bluetooth
®
connection, you can
listen to the sound from the Bluetooth
®
device
wirelessly.
Refer to the operating instructions of the
Bluetooth
®
device for details.
1 Turn on the Bluetooth
®
feature of the
device.
2 Press [ ].
≥ If “Panasonic XH” is displayed on the
Bluetooth
®
menu of the device, go to step 4.
3 Press and hold [jPAIRING].
≥ “PAIrIng” will be displayed on the unit’s
display and the unit will enter pairing
standby mode.
≥ If another Bluetooth
®
device is already
connected, the connection will be
terminated automatically.
4 Select “Panasonic XH” from the
Bluetooth
®
menu of the device.
≥ If another Bluetooth
®
device is already
connected, disconnect it.
≥ “ConnEctEd” will be displayed on the unit’s
display and the connection will be
established.
5 Start play on the Bluetooth
®
device.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this system. If a 9th
device is paired, one of the other registered devices will be
replaced.
≥ This system can only be connected to one device at a time.
≥ When “BLUEtOOtH” is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth
®
device. If the connection attempt fails, try to
establish a connection again.
≥ If you switch the source, the Bluetooth
®
device will be
disconnected.
≥ If the image and sound are out of sync during playback,
restart the playback application you are using. If the
problem persists, connect the Bluetooth
®
device and this
unit with an audio cable.
≥ “Bluetooth Standby” (> 17)
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
Bluetooth
®
operations
PAIRING
CONNECTED
SC-XH385&333GSGA-VQT5F18_mst.book 11 ページ ２０１４年３月１０日 月曜日 午後２時０分