Filter
Top Products
Simple setup
RQT7700
8
Video connections
STEP3
77
77
7 Connecting a television with a VIDEO IN terminal
77
77
7 Connecting a television with COMPONENT VIDEO IN terminals
77
77
7 Connecting a television with an S VIDEO IN terminal
VIDEO OUT terminal
Do not connect the unit through a video cassette recorder, because
the picture may not be played correctly due to the copy guard.
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output
and provide a purer picture than the S VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(P
B/PR) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors. The description of the component video
input terminals depends on the television or monitor (e.g. Y/P
B/PR,Y/
B-Y/R-Y, Y/C
B/CR). Connect to terminals of the same color.
To enjoy progressive video
1. Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
2. In QUICK SETUP, set “Progressive Out” to “Enable”.
3. Change “Progressive” to “480P” (A page 21, Picture Menu—
Video Output Mode).
•
All televisions manufactured by Panasonic that have 480P input
connectors are compatible. Consult the manufacturer if you have
another brand of television.
•
If the unit is connected to the television through VIDEO OUT or
S VIDEO OUT, output will be interlace, irrespective of the settings.
S VIDEO OUT terminal
The S VIDEO terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
VIDEO
OUT
V
ID
E
O
IN
Television
(not included)
Video cable
(included)
Rear panel
of this unit
COMPONENT
VIDEO OUT
P
R
P
B
Y
C
O
M
PO
N
E
N
T
VID
E
O
IN
Y
P
B
P
R
Video cables
(not included)
Rear panel
of this unit
S VIDEO
OUT
S VIDEO
IN
S VIDEO cable
(not included)
Rear panel
of this unit
Video cable
RQT7700(06-11)2 5/17/04, 4:02 PM8