Filter
Top Products
RQT7700
28
Recording operations
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Preparation:
• Wind up the leader tape so recording can begin immediately.
• Press [; :, TAPE] and then [L] (main unit: [L, STOP].
1 Press [c, DECK2] on the main unit and insert the
cassette to be recorded.
Insert with the side to be recorded facing towards you and the
exposed tape facing down.
The tape direction is automatically set to “F”.
2 Press and hold [PLAY MODE] to select the reverse
mode.
Every time you press and hold the button:
: One side only records.
, : Both sides record (forward → reverse).
“
” is automatically changed to “ ” when [[ REC] is pressed.
Recording
PLAY MODE
, DVD/CD
, TAPE
REC
, DECK1
, DECK2
, DVD/CD
, STOP
, TAPE
3 Select the source to be recorded.
Radio recording:
Tune to the required station. (A page 24)
Disc recording:
Insert the disc(s) you want to record.
Press [:, DVD/CD] and then [L] (main unit: [L, STOP]).
Prepare the desired disc recording mode.
• To record programmed tracks (A do steps 1–3 on page 17).
Ensure disc is stopped.
Tape-to-tape recording:
Press [; :, TAPE] and then [L] (main unit: [L, STOP]).
Press [c, DECK1] on the main unit and insert the cassette
you want to record.
4 Press [[ REC] on the main unit to start recording.
To stop recording
Press [L] (main unit: [L, STOP]).
If the tape finishes before the disc
The disc continues playing. Press [L] (main unit: [L, STOP]) to stop
it.
Note
• Multi-channel sources (3 to 5.1 channels) are automatically down-
mixed to 2 channels during recording.
• Changes to volume and sound or field quality do not affect
recording except for Multi Re-master.
• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
Erasure prevention
Use a screwdriver or similar
object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
To erase a tape
1. Press [; :, TAPE] and then
[L] (main unit: [L, STOP]).
2. Insert the recorded tape into deck 2.
Ensure there is no tape in deck 1.
3. Press and hold [PLAY MODE] to select the reverse mode.
4. Press [[ REC] on the main unit.
Side A
Tab for side B Tab for side A
Adhesive tape
RQT7700(28)3 5/10/04, 5:05 PM28