Filter
Top Products
4
Simple Setup
Assembling the speakers
RQTX0094
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥For optional wall mount, refer to page 6.
[PT754] : Front speakers
∫ Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
e.g. [PT754] Front speakers
step
1 Assembling the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Set of pipes (with cable):
For front speakers
2 Bases 8 Screws 4 Small screws2 Front speakers
Match these holes when
you insert the pipe.
1 Join the pipes.
Screws
Phillips-head
screwdriver
(not included)
Pipe
Small
screws
2 Tighten securely.
Pipe
Speaker
4
Insert the wire
fully.
i: White
j: Blue
Tighten
securely.
Cable
Push!
Tighten securely.
5 Press into
the groove.
Base
Pipe
Thread the
cable through
the base.
1
Attach the
pipes to the
speaker.
Pull and press the
cable into the groove.
Screws
Slide into the groove.
2
3
4
1
2
3
Cable
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Wall
Approx.
150 mm
(5
29
/32z)
Screw eye
(not included)
SC-PT660-663P-PC_eng.book 4 ページ ２００７年１２月１１日 火曜日 午後６時２７分