Filter
Top Products
19
Using on-screen menus
RQTX0094
∫ Menu 2 (Video)
∫ Menu 3 (Audio)
∫ Menu 4 (HDMI)
Confirming HDMI information
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (➜ above, VIDEO FORMAT)
5 (➜ above, COLOR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (➜ 22, “HDMI” menu),
“– – –” will be displayed in “AUDIO STREAM”.
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s
date display
ROTATION
To rotate a picture (during pause)
[JPEG] : 0,------. 90,------.180,------.270
^--------------------------------------------J
PICTURE MODE
NORMAL
CINEMA1: Mellows images and enhances
detail in dark scenes.
CINEMA2: Sharpens images and enhances
detail in dark scenes.
DYNAMIC: Enhances the contrast for powerful
images.
ANIMATION
: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO, k2, k4
TRANSFER
MODE
If you have chosen “480p”/“720p”/“1080p”
(progressive), “1080i” (interlaced)
[“VIDEO FORMAT” in Menu 4 (HDMI)] or
“PROGRESSIVE” under “VIDEO OUT (I/P)”
(➜ 21, “VIDEO” menu), select the method of
conversion for progressive output to suit the type
of material.
≥The setting will return to “AUTO1” when the disc
tray is opened, the unit is turned off or another
source is selected.
AUTO1: Automatically detects the film and video
content, and appropriately converts it.
AUTO2: In addition to “AUTO1”, automatically
detects film contents with different frame
rates and appropriately converts it.
VIDEO: Select when using “AUTO1” or “AUTO2”,
and the content is distorted.
DIALOGUE
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
Dolby PLII
OFF, MOVIE, MUSIC
(➜ 26, Using Dolby Pro LogicII)
JPG
DATE
PLII
HDMI STATUS
To show HDMI information.
(➜ below
,
Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (➜ 22, “HDMI”
menu) is set to “ON”.
To sharpen the “720p”, “1080i” and “1080p”
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (➜ 22, “HDMI”
menu) is set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
§
480p/720p/1080p (progressive)
§
480i/1080i (interlaced)
≥If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to “480p”.)
§
The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
COLOR SPACE
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (➜ 22, “HDMI”
menu) is set to “ON”.
To select suitable picture color with your TV
YC
bCr (4:2:2)
§
– Luminance and color details is sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible for all TV
models.
YCbCr (4:4:4)
§
– All color details is sent. Luminance and color
details are in same signal.
RGB
– Component video type of signal.
≥If the setting above is not compatible with your
TV, it will not be displayed.
§
Terms are descriptions of the sample formats
used in digital video. YC
bCr is a video signal for
luminance (Y), blue (C
b) and red (Cr) details.
HDMI
HDMI --- I NFO RMAT I ON
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOR SPAC E
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
1
2
3
4
5
e.g.
SC-PT660-663P-PC_eng.book 19 ページ ２００７年１２月１１日 火曜日 午後６時２７分