Filter
Top Products
6
RQTX1115
Preparation
≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥For assembly, use a Phillips-head screwdriver (not included).
[PT980]
Front and surround speakers
[PT580] Front speakers
step 1 Preparing the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥Keep the screws out of reach of children to prevent swallowing.
≥For optional wall mount, refer to page 22.
[PT580]
2 Front speakers
2 Stands (with cable)
2 Bases
8 Screws
[PT980]
2 Front speakers
2 Surround speakers
4 Stands (with cable)
4 Bases
8 Screws (without washer) A
4 Screws (with washer) B
A
B
[PT580] Speaker assembly option
1
2
2
1
Pull the cable
straight along
the line and slide
into the groove.
Back of the base
Leave about 80 mm.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Screw A
Tighten
securely.
Screw B
1
2
2
1
Slide into the groove.
Tighten securely.
Position the cable
between the ridges.
Leave about 120 mm.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Leave about
120 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 22.
Slide into the
groove.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Thread the speaker cable through
the base.
Attach the speaker.
SC-PT980-580G-RQTX1115_eng.book Page 6 Monday, February 8, 2010 3:25 PM