Filter
Top Products
24
RQTX1115
Getting StartedPlaying DiscsOther OperationsReference
Program and Random play do not work. [DVD-V]
These functions do not work with some DVD-Videos.
Play does not start.
≥This unit may not play WMA and MPEG4 that contains still picture data.
≥If playing DivX VOD content, refer to the homepage where you
purchased the DivX VOD content. (Example: http://vod.divx.com) [DivX]
≥If a disc contains CD-DA and other formats, proper playback may not be
possible.
No subtitles.
≥Display the subtitles. (“SUBTITLE” in Menu 1) (B14)
≥Subtitles may not be displayed depending on the disc. [DivX]
Point B is automatically set.
The end of an item becomes point B when it is reached.
The Setup menu cannot be accessed.
Select “DVD/CD” as the source.
Sound is distorted.
≥Noise may occur when playing WMA.
≥When using the HDMI output, audio may not be output from other
terminals.
Effects do not work.
Some audio effects do not work or have less effect with some discs.
Humming is heard during play.
An AC mains lead or fluorescent light is near the main unit. Keep other
appliances and cables away from the main unit.
No sound.
≥There may be a slight pause in sound when you change the play speed.
≥If the input source is bitstream, set the sound setting to PCM on the
external equipment.
≥Audio may not be output due to how files were created. [DivX]
No sound from the TV.
≥If the TV is not ARC compatible and only the HDMI connection is used,
an extra audio connection is necessary. (B 8)
≥Confirm the audio connection. Press [RADIO, EXT-IN]5 to select the
corresponding source. (B 8, 10)
≥When using the HDMI connection, ensure that “AUDIO OUT” in the
HDMI menu is set to “ON”. (B 19)
No sound from the surround speakers.
Press [SURROUND]< to select “MULTI-CH”. (B 11)
The picture on the TV is not displayed correctly or
disappears.
≥The unit and TV are using different video systems.
[For[
the[Middle[East,[
Australia,]N.Z.,]India]and]Nigeria]
Use a multi-system or
PAL TV.
[For[Southeast]Asia]
Use a multi-system or NTSC TV.
≥The system used on the disc does not match your TV.
– PAL discs cannot be correctly viewed on an NTSC TV.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV
(“NTSC DISC OUT” in VIDEO menu). (B 19)
≥Ensure that the unit is connected directly to the TV, and is not
connected through a VCR. (B 8)
≥Mobile telephone chargers can cause some disturbance.
≥If you are using an indoor TV antenna, change to an outdoor antenna.
≥The TV antenna wire is too close to the unit. Move it away from the unit.
≥Change “SOURCE SELECT” in Menu 2. [DivX] (B 14)
≥Reduce the number of connected devices.
≥When using the HDMI AV OUT terminal, ensure that an incompatible
video output with the connected TV is not selected. Press and hold
[CANCEL]4 until the picture is displayed correctly. (The output will
return to “480p” or “576p”.) (B 14)
≥Video images converted to 1920k1080 resolution may look different
from the true native 1080p full-HD sources. This is not a malfunction of
the main unit.
Picture size does not fit the screen.
≥Change “TV ASPECT” in the VIDEO menu. (B 18)
≥Use the TV to change the aspect.
≥Change the zoom setting. (“ZOOM” in Menu 2) (B 14)
Menu is not displayed correctly.
Restore the zoom ratio to “NORMAL”. (“ZOOM” in Menu 2) (B14)
Auto zoom function does not work well.
≥Turn off TV’s zoom function.
≥Zoom function may not work well, especially in dark scenes and may
not work depending on the type of disc.
When playing PAL disc, picture distorted.
Set “TRANSFER MODE” in Menu 2 to “AUTO”. (B 14)
Cannot charge or operate.
≥Check that the iPod/iPhone is connected firmly. (B 17)
≥The battery of the iPod/iPhone is depleted. Charge the iPod/iPhone,
and then operate again.
Cannot display iPod/iPhone photos/videos on the TV.
≥Ensure the video connection to the VIDEO OUT terminal on this unit
(B 8).
≥Operate the iPod/iPhone menu to make the appropriate photo/video
output settings for your TV. (Refer to operating instructions for your
iPod/iPhone.)
There is ghosting when HDMI progressive output is on.
This problem is caused by the editing method or material used on
DVD-Video, but should be corrected if you use interlaced output. When
using the HDMI AV OUT terminal, set “VIDEO FORMAT” in Menu 5 to
“480i” or “576i”. Or, disable the HDMI AV OUT connection and use the
other video connection. (B8, 14)
Distorted sound or noise is heard.
≥Adjust the position of the FM antenna.
≥Use an outdoor antenna. (B 7)
A beat sound is heard.
Turn the TV off or move it away from the unit.
The USB drive or its contents cannot be read.
≥The USB drive format or its contents is/are not compatible with the
system. (B 18)
≥The USB host function of this product may not work with some USB
devices.
≥USB devices with storage capacity of more than 32 GB may not work in
some instances.
Slow operation of the USB device.
Large file size or high memory USB device takes longer time to read and
display on the TV.
“/”
The operation is prohibited by the unit or disc.
“THIS DISC CANNOT BE PLAYED IN YOUR REGION.”
Only DVD-Video discs that include or have the same region number as
the one on the rear panel of this unit can be played. (BCover page)
“No Video”
Depending on the connected iPod/iPhone, video menu may not be
available on the TV.
Select iPod/iPhone menu (iPod/iPhone LCD) mode (B 17) and operate
video playback from your iPod/iPhone menu.
Sound
Picture
iPod/iPhone operation
HDMI progressive video
Radio
USB
TV displays
SC-PT980-580G-RQTX1115_eng.book Page 24 Monday, February 8, 2010 3:25 PM