Filter
Top Products
22
RQTX1115
Getting StartedPlaying DiscsOther OperationsReference
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
[PT980] Front speaker, Center speaker, Surround speaker
[PT580] Front speaker
e.g., [PT980] Front speaker
≥Consult a qualified building contractor to avoid damage to the wall or
speakers.
≥Use a string of less than ‰2.0 mm, which is capable of supporting over
10 kg.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Do not use commercially available lens cleaners as they may cause
malfunction. Cleaning of the lens is generally not necessary although
this depends on the operating environment.
Speaker installation option
Attaching to a wall
e.g., [PT980] Front speaker
DO NOT DO
≥In this position, the speaker will
likely fall if moved to the left or
right.
≥Move the speaker so that the
screw is in this position.
[PT980] Front and surround speakers
[PT580] Front speaker
Attach to a wall without the base and the stand
At least 30 mm
‰7.0 mm to ‰9.4 mm
Wall or pillar
[PT980] 5.5 mm to 7.5 mm
[PT580] 3 mm to 5 mm
‰4.0 mm
[PT980] Center speaker
209 mm to 211 mm
18.8 mm
117 mm
97 mm
[PT580] Surround speaker
26 mm
[PT580] Center speaker
99 mm to
101 mm
17 mm
97 mm
72 mm
349 mm to
351 mm
210 mm to
212 mm
[PT980] [PT580]
To avoid speaker dropping
Reattaching the speaker cable
Maintenance
Clean this unit with a soft, dry cloth
Before moving the unit, ensure the disc tray is empty. Failure to
do so will risk severely damaging the disc and the unit.
String (not included)
Screw eye
(not included)
Less than 10 cm
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
[PT580]
SC-PT980-580G-RQTX1115_eng.book Page 22 Monday, February 8, 2010 3:25 PM