Panasonic SC-PT550 Home Theater System User Manual


 
45
RQT8043
RQTX0038
REFERENCE
ENGLISHENGLISH
CPPM (Content Protection for Prerecorded Media)
A copy protection system used for DVD-Audio fi les. This
unit supports CPPM.
Decoder
A decoder restores the coded audio signals on DVDs to
normal. This is called decoding.
DivX
DivX is a popular media technology created by DivX, Inc.
DivX media fi les contain highly compressed video with high
visual quality that maintains a relatively small fi le size.
Dolby Digital
This is a method of coding digital signals developed by
Dolby Laboratories. Apart from stereo (2-channel) audio,
these signals can also be multi-channel audio. A large
amount of audio information can be recorded on one disc
using this method.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters
around the world. There is good separation between the
channels, so realistic sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest level of
sound that can be heard above the noise of the equipment
and the highest level of sound before distortion occurs.
Film and video
DVD-Videos are recorded using either fi lm or video. This
unit can determine which type has been used, then uses
the most suitable method of progressive output.
Film: Recorded at 25 frames per second (PAL discs)
or 24 frames per second (NTSC discs). (NTSC
discs recorded at 30 frames per second as well).
Generally appropriate for motion picture fi lms.
Video: Recorded at 25 frames/50 fi elds per second
(PAL discs) or 30 frames/60 fi elds per second
(NTSC discs). Generally appropriate for TV drama
programs or animation.
Frame still and fi eld still
Frames are the still pictures that go together to make a
moving picture.
There are about 30 frames shown each second.
One frame is made up of two fi elds. A regular television
shows these fi elds one after the other to create frames.
A still is shown when you pause a moving picture. A frame
still is made up of two alternating fi elds, so the picture may
appear blurred, but overall quality is high.
A fi eld still is not blurred, but it has only half the information
of a frame still so picture quality is lower.
HDMI (High-Defi nition Multimedia Interface)
HDMI is a next-generation digital interface for consumer
electronic products. Unlike conventional connections, it
transmits uncompressed digital video and audio signals on a
single cable. This unit supports high-defi nition video output
(720p,1080p) from the HDMI AV OUT terminal. To enjoy
high-defi nition video, a high-defi nition compatible television
is required.
I/P/B
MPEG 2, the video compression standard adopted for use
with DVD-Video, codes frames using these 3 picture types.
I: Intra coded picture
This picture has the best quality and is the best to use
when adjusting the picture.
P: Predictive coded picture
This picture is calculated based on past I or P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past and
future I and P-pictures so it has the lowest volume of
information.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding color
still pictures. If you select JPEG as the storage system
on digital cameras, etc., the data will be compressed to
1/10–1/100 of its original size. The benefi t of JPEG is less
deterioration in picture quality considering the degree of
compression.
Linear PCM (Pulse Code Modulation)
These are uncompressed digital signals, similar to those
found on CDs.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to
approximately one tenth of its size without any considerable
loss of audio quality.
MPEG4
A compression system for use on mobile devices or a
network, that allows highly effi cient recording at a low bit
rate.
Playback control (PBC)
If a Video CD has playback control, you can select scenes
and information with menus.
Progressive/Interlaced
The PAL video signal standard has 576 interlaced (i) scan
lines, whereas progressive scanning, called 576p, uses
twice the number of scan lines. For the NTSC standard,
these are called 480i and 480p respectively.
Using progressive output, you can enjoy the high-resolution
video recorded on media such as DVD-Video. Your
television must be compatible to enjoy progressive video.
Sampling frequency
Sampling is the process of converting the heights of sound
wave (analog signal) samples taken at set periods into
digits (digital encoding).
Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction
of the original sound.
WMA (Windows Media
TM
Audio)
WMA is a compression format developed by Microsoft
Corporation. It achieves the same sound quality as MP3
with a fi le size that is smaller than that of MP3.
Glossary
RQTX0038-3B.indd 45RQTX0038-3B.indd 45 4/2/07 1:46:25 PM4/2/07 1:46:25 PM