Filter
Top Products
15
RQTX1168
Other OperationReference
REGISTRATION [DivX]
Display the unit’s registration code.
≥SHOW CODE
You need this registration code to purchase and play DivX Video-on-
Demand (VOD) content (B 16).
JPEG TIME
Set the speed of the slideshow.
Factory preset: 3 SEC
≥1 SEC to 15 SEC (in 1-unit steps)
≥15 SEC to 60 SEC (in 5-unit steps)
≥60 SEC to 180 SEC (in 30-unit steps)
DEFAULTS
This returns all values in the MAIN menu to the default settings.
≥RESET
The password screen is shown if “RATINGS” (B 14) is set. Please enter
the same password, then turn the unit off and on again.
STILL MODE
Specify the type of picture shown when paused.
≥AUTO
≥FIELD: The picture is not blurred, but picture quality is lower.
≥FRAME: Overall quality is high, but the picture may appear blurred.
VIDEO OUT (I/P)
(This works only when using the COMPONENT VIDEO OUT terminal.)
Select “PROGRESSIVE” only if connecting to a progressive output
compatible TV.
≥INTERLACE
≥PROGRESSIVE: A message screen will appear. Follow the on-screen
instructions.
AUDIO menu
DYNAMIC RANGE
≥ON: Adjusts for clarity even when the volume is low. Convenient for
late night viewing. (Only works with Dolby Digital)
≥OFF
SPEAKER SETTINGS
Select the delay time of the speakers.
(Effective only when “5.1ch layout” mode is selected in “Speakers
position” (B 8, EASY SETUP settings) and playing 5.1-channel
sound.)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
If either distance a or b is less than c, find the difference in the table
and change to the recommended setting.
a Center speaker b Surround speaker
Difference (Approx.) Setting Difference (Approx.) Setting
30 cm 1ms 150 cm 5ms
60 cm 2ms 300 cm 10ms
90 cm 3ms 450 cm 15ms
120 cm 4ms
150 cm 5ms
≥SETTINGS:
≥C DELAY (Center Delay):
0ms
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
≥LS/RS DELAY (Left Surround/Right Surround Delay):
0ms
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
≥TEST TONE: SETTING
Use the test tone for speaker level adjustments (B 10, Adjusting
the speaker output level manually).
L
LS
R
SW
C
RS
C
RS
LS
:
:
:
Actual speaker position
Ideal speaker position
Primary listening
distance
Approximate room dimensions
Circle of constant primary listening distance
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
≥ENGLISH
≥繁體中文
≥ENGLISH
≥FRANÇAIS ≥ESPAÑOL ≥DEUTSCH
≥PУCCKИЙ ≥MAGYAR ≥ÇESKY ≥POLSKI
OTHERS menu
AUTO AUX LINK
≥ON: When this unit is in standby mode, this unit will turn on and
change the source to “AUX/TV” when there is an audio signal
to the AUX/TV terminal. (B 9)
≥OFF
FL DIMMER
Change the brightness of the unit’s display.
≥
BRIGHT
≥DIM: The display is dimmed.
≥AUTO: The display is dimmed, but brightens when you perform
some operations.
EASY SETUP
≥SET (B 8)
DVD-VR/DATA
Select to play only DVD-VR or DATA format.
≥DVD-VR
: To play the video programs on DVD-R/-RW.
≥DATA: To play the data files on DVD-R/-RW.
SCREEN DIMMER
This is to prevent burn marks on the TV screen.
≥OFF
≥WAIT 5 MIN
: If there is no operation for 5 minutes, the picture turns
grey. The TV screen will resume when you perform some
operations. (This does not work during video playback.)
For India, Nigeria and Southeast Asia
For the Middle East and South Africa
RQTX1168-G_eng.book Page 15 Friday, April 23, 2010 4:28 PM