Filter
Top Products
RQT9995
16
Sound effects
1
Press [SOUND] repeatedly to select a sound
effect.
2 Press [2, 1] to select the desired setting.
By main unit only
Turn [BASS] or [TREBLE] to adjust the level.
Press [PRESET EQ] repeatedly to select a setting.
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select “On D.Bass” or “Off
D.Bass”.
Clock and timers
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “Clock”.
2 Press [3, 4] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
• Reset the clock regularly to maintain accuracy.
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
To show the remaining time
Press [SLEEP].
Note:
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1 Press [CLOCK/TIMER] repeatedly to select
“Timer Adjust”.
2 Press [3, 4] to set the starting time (“On Time”)
and then press [OK].
3 Press [3, 4] to set the finishing time
(“Off Time”) and then press [OK].
4 Press [3, 4] to select the music source*
1
and
then press [OK].
Turning the timer on
1 Prepare the selected music source and set the
desired volume.
2 Press [F, PLAY].
“F” is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select “Timer
Adjust”.
(During standby, press [CLOCK/TIMER] twice.)
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
*1: “CD”, “USB”, “DAB+” ([PMX100B]), and “FM” can be set
as the music source.
• For timer music source through the port for iPhone/
iPad/iPod and USB devices, select “USB”.
Others
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being used
for approximately 20 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select “Auto Off”.
2 Press [2, 1] to select “Off” and then press [OK].
Note:
• To turn the function on, select “On” in step 2.
• This setting cannot be selected when radio is the source.
• When connected to a Bluetooth
®
device, the function does
not work.
• If “Net Standby” is set to “On”, this function will also be set
to “On”. To change the setting, set “Net Standby” to “Off”.
(> 17)
Changing the sound quality
Bass
-4 to +4
Treble
Surround “On Surround” or “OffSurround”
Preset EQ
Heavy Adds punch to rock
Soft For background music
Clear Clarifies higher frequencies
Vocal Adds gloss to vocal
Flat Cancels the sound effect
D.BASS
Setting the clock
Sleep timer
Play timer
“30min” -. “60min” -. “90min” -. “120min”
^----------- “Off” (Cancel) (----------
b
Auto off function
SC-PMX100-100B_EGEBGN-RQT9995-B.book 16 ページ ２０１５年４月２０日 月曜日 午後３時４５分