Filter
Top Products
38
RQT6951
Timer recording
You can create up to 16 timer recording programs. You can set the
timer to record an individual program up to a month in advance,
record at the same time on the same day every week, or at the same
time daily.
Preparation
≥Press [VCR] to put the remote control in VCR mode.
≥Press [DVD/VCR] to select “VCR” as the source.
≥Make sure the unit’s clock is correct (➡ page 42 to adjust it if
necessary).
≥Insert a tape, ensuring its tab is in place (➡ page 5).
1
While stopped
Press [PROG].
The timer-programming
screen appears.
2 Press [PROG]
to select an
available line
and press [ENTER].
3 Select “DATE” with [2, 1] and
change it with [3, 4].
The date changes as follows:
A.Current date
l;:
l Next day up to one month later minus one day
l;:
l Weekly timer: SU–SA > MO–SA > MO–FR
l;:
a.Daily timer: SU > MO > TU > WE > TH > FR > SA
4 Select “CH” with [2, 1] and change it
with [3, 4].
Select “AU” when recording from other equipment
(➡ page 37).
5 Select “ON” with [2, 1] and change
the start time with [3, 4].
6 Select “OFF” with [2, 1] and change
the end time with [3, 4].
7 Press [SPEED] to change the tape
speed.
Each time you press the button:
SP>EP>VP>A
§
^"""""""-""b
§
Auto SP/EP change function ➡ page 39
8
If the Jet Navigator is on (➡ page 40),
Select a category.
Press [1] to select a category column. Press [3, 4] to enter
the category selection menu. Then select a category with
[3, 4, 2, 1], and confirm with [MENU].
You can also set and change the category in the navigator list
(➡ page 41).
Repeat steps 2 to 8 to make further timer programs.
9 Press [F] to put the unit on timer
recording standby.
“F” lights on the unit’s
display.
To release the unit from timer recording standby
Press [F].
To stop recording
Press [F].
For your reference
The timer works whether the unit is on or not, so you can play DVDs
or listen to the radio (➡ page 37). Switch the unit to standby if you
are finished.