Panasonic SC-HT790V Speaker System User Manual


 
30
RQT6951
Using On-Screen Menu Icons
[Display\menu] [Picture\menu]
To change the user mode
1 Select User mode and press [1] to highlight the
number.
2 Press [3, 4] to select “1” or “2”.
U1
U2
Unit information
1
4:3 Aspect
[RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
Select how to show images made for 4:3 aspect screens on a
16:9 aspect television.
Normal: Laterally stretches images made for a 4:3 screen.
Auto: Expands suitable 4:3 letterbox images to fill more of
the screen. Other images appear in full in the
center of the screen.
Shrink: Images appear in the center of the screen.
Zoom: Expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
2
Zoom (page 27) [RAM] [DVD-A] [DVD-V] [VCD]
To select preset aspect ratio
Press [ENTER] and then [2, 1] to select. Press [ENTER] to
finish.
Making fine adjustments to the zoom ratio [3, 4]
3
Subtitle position/Subtitle brightness (page 26)
[DVD-A] [DVD-V]
4
Bitrate display on/off
[RAM] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]
5
OSD brightness (j3 to i3)
Adjust the brightness of the on-screen displays.
2345
0
x1.00
1
Normal
0 0
OFF
9.438 Mbps
Bitrate
Cur. 7.507 Mbps
Ave. 6.730 Mbps
5.0
Mbps
During play: shows the average bitrate (approximate values)
of the video being played
While paused: shows the data volume of the frame and type
of picture (page 59, Glossary—I/P/B)
Current bitrate
Average bitrate
A record of bitrates for
a sampling period.
[2, 1]
1
Picture mode [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
N: Normal mode
S: Soft mode (Soft picture with fewer video artifacts)
F: Fine mode (Details are sharper)
C1: Mellows images and enhances detail in dark scenes
C2: Sharpens images and enhances detail in dark scenes
U1/U2: User mode (below)
2
Video output mode [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
480I: Interlace video
480P: Progressive video
3
Transfer mode [RAM] [DVD-A] [DVD-V] [VCD]
Select the method of conversion for progressive output to suit
the type of material being played.
Auto 1 (normal): for viewing film material
Auto 2: for viewing film material (the same as Auto 1, but
able to convert 30-frame-per-second progressive video)
Video: for video material
4
Contrast (j7 to i7)
Increases the contrast between light and dark parts of the
picture.
5
Brightness (0 to i15)
Brightens the picture.
6
Sharpness (j7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
7
Color (j7 to i7)
Adjusts the shade of the picture’s color.
8
Gamma (0 to i5)
Adjusts the brightness of dark parts of the picture.
123
N
480P
Auto1
When progressive
output is on
14 5678
U1
000
0
0
123
U2
480P
Auto1
When progressive output is on
13 (above)
DVD
[Remember]
Press [DVD] first.