Filter
Top Products
19
RQT6951
[DVD-A] [DVD-V] [VCD]
Press [3, 4, 2, 1] to select an item and
[ENTER] to confirm.
Or, press the numbered buttons.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
Press [TOP MENU] to show the top menu.
Press [MENU] to show a menu.
Press [RETURN] to show a menu. [VCD]
[Note]
The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve the
unit’s motor and your television screen.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
(When the elapsed play time is displayed)
[JPEG]
During play
Press [POSITION MEMORY] to memorize a
position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or open the disc tray. When you turn the unit on, reselect DVD or
reinsert the disc whose position you memorized, “!” flashes on the
display. Press [1] (play) to start play from the memorized position.
The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
“!” flashes on the display when the unit has recorded the position at
which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
–Turn the unit off.
–Select another source.
–Open the disc tray.
≥Press [∫] to clear the position.
[DVD-V]
The following message appears
immediately after you press [1] (play)
when “!” is displayed.
Press [1] (play) while the message is
displayed and the beginning portions of
each chapter up to the current one are played.
Full play resumes from the point where you pressed [∫] or
[POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play
starts from where you pressed [∫] or [POSITION MEMORY].
When a menu appears on the television
Position Memory function
Resume function
Chapter Preview
Position memorized
Press PLAY to Preview Chapters
[Remember]
Press [DVD] first.