Panasonic SC-BTT 190 Speaker System User Manual


 
TV & RadioReference
Advanced
operations
25
VQT3X51
Listening to the Radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected.
(> 13)
1 Press [RADIO] to select “FM”.
2 Press and hold [STATUS] to select
“LOWEST” or “CURRENT”.
LOWEST:
To begin auto preset with the lowest
frequency (FM87.9).
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual
tuning and presetting”.
3 Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
1 Press [RADIO] to select “FM”.
2 Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] B [OK].
To select a 2-digit number
e.g., 12: [1] B [2].
Alternatively, press [W, X] or [3, 4].
Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH6] or [SEARCH5] to
select the frequency.
To start automatic tuning, press and hold [SEARCH6],
[SEARCH5] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
3 While listening to the radio broadcast
Press [OK].
4
While “P” is flashing on the display
Press the number buttons to select the channel.
A station previously stored is overwritten when another
station is stored in the same channel preset.
The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
Presetting stations
automatically
Listening to a preset
channel
SC-BTT190P_eng.book 25 ページ 2012年2月20日 月曜日 午後5時5分