Panasonic SC-BTT 190 Speaker System User Manual


 
14
VQT3X51
The following services can be used when this unit is connected to broadband.
Firmware can be updated (> 16)
You can enjoy BD-Live (> 21)
You can enjoy VIERA Connect (> 26)
You can access other devices (Home Network) (
>
27)
For details about connection method, refer to the instructions supplied with the connected equipment.
Connect the Wireless LAN Adaptor
DY-WL5
(optional). Only
DY-WL5
can be used.
Read the operating instructions for DY-WL
5
thoroughly when using it.
For up-to-date compatibility information on your wireless router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
STEP 4: Connecting to an AC power source
Connect only after all other connections are complete.
This unit consumes a small amount of AC power (
>
45) even when turned off. In the interest of power
conservation, if you will not be using this unit for an extended period of time, it can be disconnected.
Connection to the network
Wireless LAN connection
LAN cable connection
Wireless
router, etc.
Internet
LAN Cable (not supplied)
Internet
Broadband
router, etc.
AC power supply cord (supplied)
To a household AC outlet
SC-BTT190P_eng.book 14 ページ 2012年2月20日 月曜日 午後5時5分