Panasonic SC-BTT 190 Speaker System User Manual


 
Getting started
17
VQT3X51
Inserting or removing
media
When inserting a media item, ensure that it is
facing the right way up.
When removing the SD card, press the center
of the card and pull it straight out.
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
Use the front USB port when you connect a
iPod/iPhone, USB memory or a USB HDD. The
USB port on the rear panel is for the
Communication Camera and the Wireless LAN
Adaptor DY-WL5 (optional).
Enjoying TV with unit’s
speakers
1 Connect the TV and the main unit. (> 12)
2 Press [EXT-IN] several times to select the
appropriate external input mode.
(
> 18)
Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
1 Press and hold [jAUDIO] to activate the
audio setting mode.
2 Press [jAUDIO] several times to select
the audio. (MAIN, SAP)
Set
PCM-FIX
” (
> 33)
to “Off
”.
“SAP” (
Secondary Audio Program
) only
works with
Dolby Dual Mono.
You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
iPod
VOL
OPEN/CLOSE
*
* (For details > 22)
Selecting the type of audio
SC-BTT190P_eng.book 17 ページ 2012年2月20日 月曜日 午後5時5分