Panasonic SC-BTT583 Home Theater System User Manual


 
26
VQT3Z79
Preparation
Turn the main unit off or reduce the volume of
the main unit to its minimum.
1 Push the centre of drawer (A), and pull
out fully until it clicks to open the dock.
2 Attach the dock adapter (B) until it is
firmly in place.
To purchase a dock adapter, consult your
local dealer for iPod/iPhone.
3 Connect the iPod/iPhone firmly.
Check that the connector has no dust or
foreign materials before connecting.
Make sure that the video cable connection is
made to view photos/videos on the TV.
Preparation
To display the picture, turn on the TV and select
the appropriate video input mode.
1 Press [HOME].
2 Select “iPod” and press [OK].
3 Select the item to play.
Select “All” mode to display the photo.
Repeat this procedure if necessary.
“All” mode
If “All” mode is used, you can use your iPod or
iPhone to play back music/photo/video files. The
remote control of this unit can be used to control
iPod/iPhone operations.
Album artwork (For music playback only.)
e.g., music playback screen
If album artwork is not contained in the
data, “ ” will appear on TV.
Depending on the software version of your
iPod/iPhone, the album artwork may not
appear properly.
Some operations may not work while
reading the album artwork.
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select the
menus.
3 Press [3, 4] to select an item and press
[OK].
The setting of the playback mode will be kept until changes
are made on the same iPod/iPhone.
This function does not work when “All” is selected.
Surround sound effect and sound mode are available.
iPod/iPhone Connection
The centre of drawer
iPod/iPhone
(not supplied)
VIDEO IN
L
R
AUDIO IN
iPod/iPhone Playback
Other methods of playback
iPod
Ronaldo
-2:30
Good morning
45 of 1230
Happy days
1:00
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 26 ページ 2012年1月19日 木曜日 午前10時34分