Filter
Top Products
Getting started Playback
23
VQT3Z79
Playback
Playback
1 Insert the media.
Playback starts depending on the media.
Repeat this procedure if necessary.
≥ Signal from PAL discs is output as PAL. Signal from NTSC
discs is output as “NTSC” or “PAL60”. You can select
“NTSC” or “PAL60” in “NTSC Contents Output” for NTSC
discs. (> 36)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your television screen
and so on.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 video
which have been dragged and dropped, copied and pasted
to the media.
Following functions may not work depending on
the media and contents.
Press [∫STOP].
The stopped position is memorized.
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or
you press [∫STOP] several times to display
“STOP” on the unit’s display.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Music and MP3: The speed is fixed to a single
step.
Slow-motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback
speed.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ BD-Video and AVCHD: [1] (;1) only.
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
2 Select the item to play and press [OK].
Operations during playback
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 23 ページ ２０１２年１月１９日 木曜日 午前１０時３４分