Panasonic SC-ALL3 Home Theater System User Manual


 
- 30 -
Troubleshooting
Before requesting service, make the following checks.
If the problem remains unresolved, consult your dealer for instructions.
Refer to the limited warranty on the “Owner’s Manual <Setup>”.
To return all settings to the factory defaults
1 Turn this unit on.
If the network indicator is blinking in blue and red, proceed to the next step
after the blinking stops.
2 Touch and hold [Í/I].
The operation indicator (amber) starts to blink.
3 While continuing to hold [Í/I], touch [-WPS].
The mode indicator (amber) blinks 4 times.
Humming heard during playback.
There are cords of other appliances or fluorescent light near the unit’s
AC power supply cord (AC mains lead). Turn the appliances off or keep
them away from the AC power supply cord (AC mains lead).
The sound is distorted when using the AUX IN jack.
High level of input signal distorts the sound. Turn down the volume of
the connected device to reduce the input signal.
The network indicator does not stop blinking in blue and red.
The unit needs to be repaired. Consult your dealer.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s firmware to ensure that
our customers are enjoying the latest technology. (l 24)
General