Filter
Top Products
- 16 -
8 Make sure the device is connected to your network.
≥ Enable Java and cookies in your browser settings.
∫ Network standby
This unit will turn on automatically from standby mode when you select the
unit as the output speakers.
Touch and hold both [-WPS] and [VOL +] until the mode indicator
(amber) blinks.
The indicator blinks once: on
The indicator blinks twice: off (default)
≥ If this function is set to on, the network (wired LAN/Wi-Fi) remains active even
in standby mode.
– The power consumption in standby mode will increase.
≥ If this function is set to off, the network (wired LAN/Wi-Fi) is disabled in standby
mode.
– The network (wired LAN/Wi-Fi) will be enabled when the unit is turned on.
– The power consumption in standby mode will be reduced.
≥ If the network indicator is blinking in blue and red, wait until the blinking stops.
≥ When the unit is turned on by this feature, the beginning part of the music may
not be played back.
≥ Depending on the app, the conditions for activating this function may differ.
≥ The unit may not turn on even when selected as the output speakers. In that
case, start playback.