Filter
Top Products
15
RQTX1097
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
USB and internal memory
The USB connectivity enables you to record sound or
music tracks from various sources to MP3 format and
store into the USB mass storage device which can be
played back. Typically, USB memory devices (bulk
only transfer).
The 2 GB internal memory of this unit also allows you
to store recorded sound or music tracks from various
sources to MP3 format which can also be played
back when desired.
You can play or record up to 800 folders (maximum
999 tracks in an album) or a total of 8000 tracks,
depending on the available storage capacity.
Connecting a USB mass storage
device
Preparation
Before connecting any USB mass storage device to
the unit, ensure that the data stored therein has been
backed up.
It is not recommended to use a USB extension cable.
The USB device connected via the cable will not be
recognized by this unit.
MUSIC PORT
MIC VOL
MIC
MIN MAX
FM/AM
TRACK
x
OPEN/CLOSE
USB
4/9
MEMORY
4/9
CD
4/9
Reduce the volume and connect the USB
mass storage device to the USB port.
Note:
When you connect your digital audio player to the
USB port, it charges all the time except in standby
mode.
USB enabled
device
(not included)
Checking the USB and internal memory
status
You can check available storage space in the USB
device or internal memory.
1 Press [4/9, USB] or [4/9, MEMORY]
and then [8] (stop).
2 Press [DISPLAY] repeatedly in the stop
mode.
Original
display
]
Memory available
storage space
]
USB remaining
recording time
Example of USB remaining recording time:
Original
display
]
Memory remaining
recording time
]
USB available
storage space
Example:
Note:
The memory's remaining recording time will also
have similar display as USB.
Shows the time is 10
minutes and 15 seconds
Shows the time 20
hours and 15 minutes
AKX50_EB_EN.indd 15AKX50_EB_EN.indd 15 6/8/2010 5:25:26 PM6/8/2010 5:25:26 PM