Filter
Top Products
24
RQT804
RQTX1097
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Connecting and playing other
external unit
You can connect to an analogue player with a built-in
phone equalizer.
(R)
(L)
1 Press [MUSIC P./AUX] repeatedly to
select “AUX”.
2 Play the external unit. (See the external
unit’s instruction manual.)
Note:
• When units other than those described above are to
be connected, please consult your audio dealer.
• Sound distortion may occur when you use an
adaptor other than the one supplied.
“LINE OUT”
position
Rear panel of
this main unit
Analogue player
(not included)
Using other optional
equipments
Note:
All the peripheral components and cables are sold
separately.
Avoid interfering with other
Panasonic equipment
Other Panasonic audio or video equipment may
start functioning when you operate the unit using the
supplied remote control.
You can operate this unit in another mode by setting
the remote control operating mode to “REMOTE 2”.
The main unit and remote control must be set to
the same mode.
1 Press and hold [MUSIC P./AUX] on the
main unit and [ 2 ] on the remote control
until the main unit’s display shows
“REMOTE 2”.
2 Press and hold [OK] and [ 2 ] on the
remote control for at least 2 seconds.
To change the mode back to “REMOTE 1”, repeat
steps 1 and 2 by replacing [ 2
] with [ 1 ].
Connecting and playing a portable
audio equipment
This feature enables you to enjoy music from a
portable audio equipment.
MUSIC PORT
MIC VOL
MIC
MIN MAX
x
OPEN/CLOSE
Switch off the equalizer function (if there is any) of
the portable audio equipment before you plug into
the MUSIC PORT jack. Otherwise, sound from the
speaker may be distorted.
1 Plug the audio cord into the MUSIC
PORT jack.
2 Press [MUSIC P./AUX] repeatedly to
select “MUSIC PORT”.
3 Play the portable audio equipment.
(See the portable audio equipment’s
instruction manual.)
Portable audio equipment
(not included)
Audio cord
(not included)
AKX50_EB_EN.indd 24AKX50_EB_EN.indd 24 6/8/2010 5:25:28 PM6/8/2010 5:25:28 PM