Filter
Top Products
Confidential
Until:
9 May 2014
16
RQT9899
Specifications
█ Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
175 W per channel (4 Ω), 1 kHz, 30% THD
Total RMS stereo mode power 350 W (30% THD)
FTC output power stereo mode
Front Ch (both ch driven)
80 W per channel (4 Ω), 50 Hz to 20 kHz, 1% THD
Total FTC stereo mode power 160 W
█ Tuner, terminals section
Preset memory FM 30 stations
Frequency modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals 75 Ω (unbalanced)
Analog audio input Pin jack (1 system)
█ Disc section
Disc played [8 cm (3″) or 12 cm (5″)]
CD, CD-R/RW (CD-DA, MP3 )
Pick up
Wavelength 790 nm (CD)
MPEG-1 Layer 3
█ Bluetooth
®
section
Version Bluetooth
®
Ver. 2.1 + EDR
Class Class 2
Supported profiles A2DP, AVRCP, SPP
Operating frequency 2.4 GHz band, FH-SS
Operation distance 10 m (33 ft) line of sight
█ USB section
USB port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
USB port power 500 mA (max)
█ Speaker section
Speaker unit(s)
Woofer 16 cm (6 ½″) cone type
Tweeter 6 cm (2 ⅜″) cone type
Impedance 4 Ω
Dimensions (W x H x D) 200 mm x 334 mm x 233 mm
(7 ¾″ x 13 ¼″ x 9 ¼″)
Mass (Weight) 3 kg (6.6 lbs)
█ General
Power supply AC 120 V, 60 Hz
Power consumption 50 W
Dimensions (W x H x D) 230 mm x 335 mm x 243 mm
(9 ¼″ x 13 ¼″ x 9 ¾″)
Mass (Weight) 2.7 kg (6 lbs)
Operating temperature range 0°C to +40°C
(+32°F to +104°F)
Operating humidity range
35% to 80% RH (no condensation)
Note:
• Specifications are subject to change without notice.
Mass (weight) and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyzer.
Power consumption in standby mode
0.4 W (approximate)
Power consumption in standby mode
(With “BLUETOOTH STANDBY” set to “ON”)
0.5 W (approximate)
SC-AKX18 P RQT9899-P EN.fm Page 16 Monday, April 14, 2014 10:41 AM
printing