Filter
Top Products
4
RQT8043
RQTV0199
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
(L)
(R)
Getting started
Making the connectionsMaking the connections
Connect the AC power supply cord only after all other connections have been made.
Voltage selector.
Use a fl at-head screwdriver to set the voltage
selector on the rear panel to the appropriate
position for the area in which this system is
used.
Connect the AC power supply cord.
Insertion of connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing. However there is no
problem using the unit.
Connector
Appliance inlet
If the power plug does not fi t your socket, use the power
plug adaptor (included).
For your reference
To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. You will need
to reset some memory items after plugging in the unit.
Note:
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
To household AC outlet
Connect the FM indoor antenna.
Tape the antenna where reception is best.
(
)
Adhesive
tape
Connect the AM loop antenna.
Stand the antenna
up on its base.
Connect the speaker cords.
Connect the
left (L) side
in the same
way
R
L
Blue (–)
Red (+)
Black
(–)
Grey (+)
AK450
AK350
AK250
Red (+)
Black (–)
Connect
the left (L)
side in the
same way
Black
Red
RQTV0199-M_1EN.indd 4RQTV0199-M_1EN.indd 4 2/13/07 1:37:57 PM2/13/07 1:37:57 PM