Filter
Top Products
18
RQT8043
RQTV0199
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
Maintenance
If the surfaces are dirtyIf the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
For a cleaner crisper sound (cassette deck)For a cleaner crisper sound (cassette deck)
Clean the heads regularly to assure good quality playback
and recording. Use a cleaning tape (not included).
When moving the unit
1
Remove all discs.
2
Press [y/I, POWER] to turn the unit off.
3
Disconnect the AC power supply cord.
Disc trays
Disc tray(s) cannot open.
“CHGR ERR ” is displayed.
Press [y/I, POWER] to release the jammed tray(s) as the unit will switch off.
Switch it on again and the tray(s) will initialize to the previous tray(s) condition.
If this still does not fi x the problem, please consult the dealer.
Remote control
Remote control doesn’t work.
Check that the batteries are inserted correctly. 5
Replace the batteries if they are worn.
USB
No response when [¶, REC] button
is pressed.
Disconnect the USB device and then reconnect it back. Alternatively, turn the
unit off and then back on.
The USB drive or its contents
cannot be read.
The USB drive format or its contents is/are not campatible with the system. (
The USB host function of this product may not work with some USB devices.
USB devices with storage capacity of more than 8 gigabytes may not work in
some instances.
Slow operation of the USB fl ash
drive.
Large fi le size or high memory USB fl ash drive takes longer time to read.
“USB OVER CURRENT ERROR”
The USB mass storage device rating exceeds 500mA. Disconnect the USB
device. Turn the unit off and then back on.
“NO PLAY”
Check the content.
Only MP3 format fi les can be played.
Memory reset (Initialization)
When the following situations occur, refer to the instructions below to reset the memory:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
To reset memory
1 Disconnect the AC power supply cord. (Wait at least 3 minutes before proceeding to step 2)
2 While pressing and holding down [y/I, POWER] on the main unit, reconnect the AC power supply cord.
“– – – – – – – – –” appears on the display.
3 Release [y/I, POWER].
All the settings are returned to the factory preset.
You will need to reset the memory items.
Troubleshooting guide (continued)
RQTV0199-M_1EN.indd 18RQTV0199-M_1EN.indd 18 2/9/07 2:23:08 PM2/9/07 2:23:08 PM