Filter
Top Products
15
RQT8043
RQTV0199
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
Connecting to a portable audio equipmentConnecting to a portable audio equipment
This feature enables you to enjoy music from a portable
audio equipment.
Note:
All peripheral components and cables are sold separately.
Audio cord
(not included)
Portable audio equipment
(not included)
Playing from a portable audio Playing from a portable audio
equipmentequipment
Switch off the equalizer function (if there is any) of the
portable audio equipment before you plug into the MUSIC
PORT jack. Otherwise, sound from the speaker may be
distorted.
1
Plug the audio cord into the MUSIC PORT jack.
2
Press [EXT-IN] repeatedly until “MUSIC PORT” is
displayed.
3
Play the portable audio equipment. (See the portable
audio equipment’s instruction manual.)
(R)
(L)
“LINE OUT”
position
AUX
IN
L
R
Analog player
(not included)
Rear panel of this unit
Playing or recording from an Playing or recording from an
external unitexternal unit
You can connect to an analog player with a built-in phone
equalizer.
1
Press [EXT-IN] repeatedly until “AUX” is displayed.
2
For listening : Proceed to step 3.
For recording : Press [¶, REC] on the main unit to start
recording.
3
Start playback from the external source.
Note:
• For details, refer to the instruction manual of the unit which is to
be connected.
• When units other than those described above are to be
connected, please consult your audio dealer.
• Sound distortion may occur when you use an adaptor other than
the one supplied.
External unit
Connecting and playing a USB massConnecting and playing a USB mass
storage class device storage class device
AK450
AK350
The USB connectivity enables you to connect and play
MP3 tracks from USB mass storage class. Typically, USB
memory devices. (Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the
unit, ensure that the data stored therein has been backed
up.
It is not recommended to use a USB extension cable. The
USB device is not recognised by this unit.
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised by
this unit.
1
Reduce the volume and connect the USB mass storage
device.
2
Press [6, USB] to start play.
To Action
pause play
USB
Press [6, USB].
Press again to resume play.
stop play
Press [7, CLEAR].
“RESUME” is displayed. The position is
memorized.
Press [6, USB] to resume.
Press [7, CLEAR] again to clear the position.
skip tracks
Press [4, / REW] or [¢, / FF].
skip album
Press [ALBUM ( or )] in the play mode.
Press [ALBUM (
or )] once and then
the numeric buttons in the stop mode.
For other operating functions, they are similar as those
described in “Discs” (\ page 8 ~ 10).
RQTV0199-M_1EN.indd 15RQTV0199-M_1EN.indd 15 2/9/07 2:23:01 PM2/9/07 2:23:01 PM