Panasonic SC-HT743 Home Theater System User Manual


 
Speaker connections
Ensure the AC cord is disconnected before you make the speaker connections.
Be careful not to cross
(short-circuit) or reverse the
polarity of the speaker
wires as doing so may
damage the speakers,
@ SUBWOOFER
The illustration shows SC-HT740 for U.S.A. and Canada.
insert the @ CENTER
4: White
) @ FRONT (R)
FRONT (L)
@SURROUND(R)
wire fully.
SURROUND(L)
Main unit
Audio and video connections
Do not connect through the video cassette recorder,
Due to copy guard protection, the picture may not be displayed properly.
Turn the television off before connecting, and refer to the television's operating instructions.
HDMI-compatible television
(not included)
H_mll
AV EN
HDMI cable (not included)
Back of the main unit
H_:am|
AV OUT
Use the HDMI connection to enjoy higher quality audio and video with a
single cable (4 page 13, HDMI).
By connecting to an HDMI-compatible high-definition television, you can
enjoy high-definition video (720p or 1080i) with 2-channel audio.
Set "Video Output" to "On" and "Audio Output" to "On" (4 page 24,
"HDMI" tab).
Set "Video Output Mode" (4 page 21, Picture Menu).
It is recommended that you use Panasonic's HDMI cable.
[Recommended part number: RP-CDHG15 (1.5 m/4.9 ft),
RP-CDHG30 (3.0 m/9,8 ft), RP-CDHG50 (5.0 m/16.4 ft), etc.]
Non-HDMI-compliant cables cannot be utilized.
i HT940_
Control with HDMI (HDAVI Control)
If your Panasonic television isan HDMI control compatible television,
you can operate your television synchronizing with home-theater
operations or vice versa [4 page 30, _ Operating both the
television and the home theater system: Control with HDMI (HDAVl
ControITM)].
Make the extra audio connection (4 page 9) when you use HDAVl
Control function.