Panasonic SC-HT743 Home Theater System User Manual


 
I
Up to
1
2
3
4
FMIAM
Numbered
buttons
MEMORY SELECTOR
-TUNE MODE/--FM MODE vTUNiNG^
15stations can be set in each band, FMand AM.
Press [SELECTOR] to select "FM" or "AM".
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button: MANUAL_ PRESET
Press [v TUNING A] to tune to the lowest frequency
(FM: 87.9 or 87.5, AM: 520).
Press and hold [MEMORY].
Release the button when "FM AUTO" or "AM AUTO" is displayed.
The tuner presets all the stations it can receive into the channels in
ascending order.
"SET OK" is displayed when the stations are set, and the radio
tunes to the last preset station.
"ERROR" is displayed when automatic presetting is unsuccessful.
Preset the channels manually (4 right).
1
2
Press [FM/AM] to select "FM" or "AM".
Press the numbered buttons to select the channel.
To select a 2-digit number / 1
e'g 12; [>10] -_ [1] -_ [2] ]--]_l ] _'_
Alternatively, press [v, A]. L /- I ] C
When a stereo FM broadcast is being received,
"ST" lights in the display.
If noise is excessive
When "FM" is selected
Press and hold [--FM MODE] on the main unit to
display "MONO". ( ,"[40-N_",
Press and hold [--FM MODE] again to cancel the mode.
The mode is also canceled when you change the frequency.
When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2_BP 1
1 Press [SELECTOR] to select "FM" or "AM".
2 Press [-TUNE MODE] to select "MANUAL".
3 Press [v TUNING A ] to select the frequency.
To start automatic tuning, press and hold [v TUNING A] until the
frequency starts scrolling. Tuning stops when a station is found.
Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
0) While listening to the radio broadcast
Press [ENTER].
(2) While the frequency and "PGM" are flashing on the display
Press the numbered buttons to select a channel.
To select a 2-digit number / I / 1
e.g. To select 12: ]1 I i_
[>10] -) [1] -') [2] k -- tL
Alternatively, press [v, A], and then press ]ENTER].
The station occupying a channel is erased if another station is
preset to that channel.
o
£c
m