Filter
Top Products
16
RQTX0271
ESPAÑOLESPAÑOLESPAÑOLESPAÑOL ENGLISH
Using the microphone
Changing the sound quality: Preset EQ
Changing the sound quality: Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY CLEAR SOFT VOCAL
FLAT (off) HALL LIVE
DISCO
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
DISCO Produces sound with the same kind of lengthy
reverberations heard at a disco
LIVE Makes vocals more alive
HALL Adds an expansiveness to the sound to produce
the atmosphere of a great concert hall
FLAT No effect
Changing the sound quality:
Changing the sound quality:
Manual EQ
Manual EQ
1 Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS MID
TREBLE
Setting Effect
BASS For lower pitch sound
MID For middle pitch sound
TREBLE For higher pitch sound
2 Press [4 / 1] or [¡ / ¢] to adjust the level.
OR
By main unit only
Setting the BASS;
Turn [BASS CONTROL] to either increase (+) or decrease (–) the
pitch.
Note:
• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the
next time you select “MANUAL EQ”.
Using sound effects
The buttons described for “Using the microphone” are mainly
using the main unit unless indicated otherwise.
Enjoying the microphone mixing
Enjoying the microphone mixing
You can enjoy microphone mixing from various music sources
(disc, radio, USB device or other equipments).
1 Firstly, lower the volume with [MIC VOL, MAX/MIN],
connect the microphone (not included) to the microphone
jack.
Plug type : Ø 3.5 mm monaural
2 Start playing the music source.
3 Adjust the volume with [+/–, VOLUME] and
[MIC VOL, MAX/MIN] and sing along.
Note:
• If a strange noise (howling) is emitted during use, move
the microphone away from the speakers, or turn down the
microphone volume.
• When you are not using the microphone, disconnect it from the
microphone jack, and turn down the microphone volume level to
“MIN”.
Changing the sound quality:
Changing the sound quality:
RE-MASTER
RE-MASTER
This feature reproduces the frequencies lost during recording
(original soundtrack) to give you a sound closer to the original.
Press [RE-MASTER] repeatedly to select either
“ON RE-MASTER” or “OFF RE-MASTER”.
Note:
• During CD (MP3) or USB selection, the re-master effect is digital.
• As for MUSIC PORT selection, the re-master effect is analogue.
Enjoying the bass: D.BASS
Enjoying the bass: D.BASS
Press [D.BASS] repeatedly to select either “ON D.BASS” or
“OFF D.BASS”.
RQTX0271-B_GB.indd 16RQTX0271-B_GB.indd 16 5/6/09 11:00:21 AM5/6/09 11:00:21 AM