Filter
Top Products
10
RQTX0271
ESPAÑOLESPAÑOLESPAÑOLESPAÑOL ENGLISH
Changing multiple discs
By main unit only
Press [0, EXCHANGE] repeatedly to check and change
multiple discs.
Note:
• The tray with a disc being played will not open.
• If the player is stopped, all trays will open. To close the remaining
trays simultaneously, press [0, OPEN/CLOSE].
Advanced play
Advanced play
Program play
This function allows you to program up to 24 tracks.
1 Press [6, CD] and then [7] (stop).
2 Press [PROGRAM].
“PGM” appears.
3 Press [¶ DISC] and then [
¶
1] ~ [
¶
5] to select the disc.
4 Press the numeric buttons to select your desired track.
Repeat steps 3 and 4 to program other tracks.
5 Press [6, CD] to start play.
1 Press [¶ DISC] and then [
¶
1] ~ [
¶
5] to select the disc.
2 Press [7] (stop).
3 Press [PROGRAM].
4 Press [5/∞, ALBUM] to select your desired album.
5 Press [4 / 1] or [¡ / ¢] to select the track.
To select a track directly, press the numeric buttons after press
[4 / 1] or [¡ / ¢].
6 Press [OK].
Repeat steps 4 to 6 to program other tracks.
7 Press [6, CD] to start play.
For two-digit track, press [
h
10] once then the two digits.
For three-digit track, press [
h
10] twice then the three digits.
Cancel
program mode
Press [PROGRAM] in the stop mode.
Replay the
program
Press [PROGRAM] then [6, CD] in the stop
mode.
Add to the
program
Repeat steps 3 and 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
Check
program
contents
Press [4 / 1] or [¡ / ¢] when “PGM” is
displayed in the stop mode.
The track number, program order and disc
number are displayed:
Program orderTrack number
The program order is displayed followed by the
album number and track number.
Clear the last
track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
Press [7] (clear) in the stop mode.
“CLEAR ALL” is displayed.
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
Repeat play
You can repeat program play or other selected play mode.
Press and hold [– REPEAT].
“REPEAT ON” and “
” are displayed.
To cancel
Press and hold [– REPEAT] again.
“REPEAT OFF” is displayed and “
” is cleared.
Note:
You can use repeat mode with “Program play” (\ see left) and
“Play Mode function” (\ page 9).
Discs (continued)
NOTE on MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and
20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
•
To play in a certain order, prefi x the folder and fi le names with
3-digits numbers in the order you want to play them.
When “PLAYERROR” appears on the display, an unsupported
MP3 format is being played. The unit will skip that track and play
the next one.
Limitations on MP3 play
• If you have recorded MP3 on the same disc as CD-DA, only
the format recorded in the fi rst session can be played.
• Some MP3s may not be played due to the condition of the disc
or recording.
• Recordings will not necessarily be played in the order you
recorded them.
• This unit can access up to 99 tracks.
• This unit can play MP3 fi les and CD-DA format audio
CD-R/RW that have been fi nalised.
• It may not be able to play some CD-R/RW due to the condition
of the recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
NOTE on CDs
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet the
technical specifi cations of the Compact Disc Digital Audio
(CD-DA) format so playback may not be possible.
RQTX0271-B_GB.indd 10RQTX0271-B_GB.indd 10 5/6/09 10:59:58 AM5/6/09 10:59:58 AM