Filter
Top Products
13
RQTX0271
ESPAÑOLESPAÑOLESPAÑOLESPAÑOL
ENGLISH
Recording of MP3 tracks
You can record MP3 tracks stored in an album from disc to a USB
device.
1 Insert the disc you want to record.
2 Press [6, CD] and then [7] (stop).
3 Press [5/∞, ALBUM] to select the desired album.
4 Press [
¶¥8
, USB REC] to start recording.
Example:
Album being recorded Percentage of the
recording process
Stop recording Press [7] (stop).
Recording stops at the last completed track
in the album. “NO. FXXX” which is the folder
name will be displayed.
Example: If recording stops amidst the fourth
track, only the fi rst three tracks will
be stored. “NO FILE RECORDED”
is displayed if recording stops
amidst the fi rst track.
Erased a
recorded track
(\ page 14)
Note:
• Some fi les may take longer to record.
• Depending on the condition of the disc or fi le, some MP3 fi les may
not be able to record.
Checking the track information
While performing basic recording function (\ page 12), you can
view the information of the current track from the display panel.
Press [DISPLAY] repeatedly during recording.
Example: display during CD recording
Remaining play time
REC mode
Elapsed play time
USB remaining REC time
Advanced recording functions
Advanced recording functions
High-speed recording
Recording speed:
CD to USB device : Four times (maximum of 4x) the normal
speed.
CD-RW to USB device : Two times (2x) the normal speed.
1 Insert the CD you want to record.
2 Press [6, CD] and then [7] (stop).
3 Press [PLAY MODE] to select 1-TRACK, 1-DISC or ALL
DISC.
4 Press [CD HI-SPEED] and [
¶¥8
, USB REC] simultaneously
to start recording.
Note:
• Depending on the condition of the disc, it may not be possible
to record at four times the normal speed or perform high-speed
recording. Record the CD at normal speed.
• The sound is muted during high-speed recording.
Recording from CD using analogue format
You can change your recording mode from the default digital
recording to analogue recording.
1 Press [6, CD] and then [7] (stop).
2 Press and hold [EDIT MODE] to select “ANALOG-REC”.
Each time you press and hold the button:
ANALOG-REC
(analogue recording)
DIGITAL-REC
(digital recording)
Note:
• The recording mode returns to the default “DIGITAL-REC” after
completing the analogue recording.
• High-speed recording is not applicable while using analogue
mode.
RQTX0271-B_GB.indd 13RQTX0271-B_GB.indd 13 5/6/09 11:00:15 AM5/6/09 11:00:15 AM