Filter
Top Products
17
RQT5706
Cassette deck operations
1
2
3
4
DECK OPEN
REV MODE
TAPE
dB
FWD
FWD
1
4
2
3
STOP
DOWN
UP
VOLUME
Listening to tapes
Press [c DECK OPEN].
The unit will come on automatically.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Tape direction is automatically set to “a”.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is played.
: Both sides are played.
: Both sides are played repeatedly until [STOP L] is
pressed.
Press [TAPE / -] to start playback.
Every time you press the button; b ↔ a
a : The forward side (front side) will play.
b : The reverse side will play.
Adjust the volume.
To stop tape playback
Press [STOP L].
One-touch play
When the system is OFF and a tape is already inserted, play starts
automatically when you press [TAPE / -].
Cassette tape selection and care
The unit can correctly play the following types. It identifies the type
automatically.
Normal position/TYPE I ✔
High position/TYPE II ✔
Metal position/TYPE IV ✔
•
Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
•
Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
•
Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
Front side
Tape direction