Filter
Top Products
Simple setup
9
RQT6183
FM
ANT
AM
ANT
AC IN~
LOOP ANT
HOLDER
LO
O
P
EXT
75
Ω
G
ND
VOLT ADJ
127 V 110 V 220 V-230 V 240 V
1
2
1
2
3
Adhesive tape
To household AC outlet
FM indoor antenna (included)
Fix the other end of the antenna
where reception is best.
AM loop antenna (included)
Keep loose antenna cord away from
other wires and cords.
AC power supply cord
(included)
Antennas and AC power supply cord
STEP3
AM loop antenna
holder (included)
To attach to a wall or other surface
Screw
(included)
[For\areas\except\U.S.A.\and\Canada[
Before connecting the
AC power supply cord
Set the voltage.
(Bottom panel)
Use a flat-head screwdriver to turn the
voltage selector on the bottom of the unit
to the appropriate position for the area in
which this system is used.
If the power supply in your area is 115 V
or 120 V, please set the voltage selector
as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
Note
The included AC power supply cord is for use with this unit only. Do not use
it with other equipment.
Conserving power
The unit consumes power (for U.S.A. and Canada: approx. 0.28 W, for Latin
America and others: approx. 0.8 W) even when it is turned off with [Í]. To save
power when the unit is not to be used for a long time, unplug it from the house-
hold AC outlet. Remember to reset the radio stations and any other memory
items before using the unit again.
For your reference
Information you enter into the unit’s memory remains intact for up to a week
after the AC power supply cord is disconnected.
[For\areas\except\U.S.A.\and\Canada[
If the power plug will not fit your AC outlet
Use the power plug adaptor (included).
If it still doesn’t fit, contact an electrical parts distributor for assistance.
Turn the antenna to the
angle of best reception
and least interference.