Filter
Top Products
Simple setup
RQT6183
8
Simple setup
Television The illustration shows SC-HT95.
STEP2
Note
≥The screen may shift off center when using progressive output.
Adjust the position of the screen if this occurs (➡ page 21,
Video—Horizontal position).
≥Video will not be displayed correctly if you connect to a televi-
sion that is incompatible with this unit’s copy guard system.
≥This unit does not output video signals from the VIDEO OUT
and S-VIDEO OUT terminals when the “PROGRESSIVE OUT”
indicator is on.
For your reference
All televisions manufactured by Panasonic and that have 480p
input terminals are compatible. Consult the manufacturer if you
have another brand of television.
[HT95]
COMPONENT VIDEO OUT terminal
≥The description of the component video input terminals de-
pends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y,
Y/CB/CR). Connect to terminals of the same color.
≥After making this connection, change the black level for a better
picture (➡ page 28, Video—Black Level Control).
To enjoy progressive video
1. Connect to the component video (480p) input terminals on a
television compatible with this unit’s copy guard system.
2. Press [PROGRESSIVE OUT] on the front panel so the
indicator lights (➡ page 12).
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard.
NOTE
This unit does not output video signals from the
VIDEO OUT and S-VIDEO OUT terminals when the
“PROGRESSIVE OUT” indicator is on.
COMPONENT
VIDEO IN
Y
P
B
P
R
COMPONENT
VIDEO OUT
(480P/480I)
Y
P
B
PR
V
ID
E
O
O
U
T
S-VIDEO
OUT
T
V
A
U
D
IO
IN
VIDEO
IN
L
R
Y
COMPONENT
VIDEO OUT
(480P/480I)
P
B
P
R
S VIDEO
IN
S-VIDEO
OUT
For better images
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture
than the VIDEO OUT terminal by separating the chromi-
nance (C) and luminance (Y) signals before transmitting
them to the television.
(Actual results depend on the television.)
Audio cable (not included)
Video cable (included)
S video cable (not included)
For better images
[HT95]
COMPONENT VIDEO OUT terminal (see below)
These terminals can be used for either interlace or progressive out-
put and provide a purer picture than the S-VIDEO OUT terminal.
Connection using these terminals outputs the color difference
signals (PB/PR) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors.
Video cable (not included)
Television (not included)
Television
Television
To listen to the televi-
sion through this unit
TV’s AUDIO OUT
terminals