Filter
Top Products
17
RQT6183
Disc operations
[DVD-A]
[CD] [VCD] (There is no on-screen display.)
Remote control only
While stopped
Press [PLAY MODE] to select the play mode.
The mode changes as follows each time you press the button.
All group play ([DVD-A] only) Program play (e.g. [CD])
All disc random play
Normal play ([CD] [VCD] only) Random play
After selecting the mode, follow the steps for the mode.
[DVD-A] If you select bonus groups, you will have to enter a 4-digit
password (➡ page 15).
All group play [DVD-A]
To play all the groups in succession
Press [1] (PLAY).
Random play
To play tracks on the current disc randomly
e.g. [DVD-A] (three groups)
1 [DVD-A]
Press [
2, 1
] to select a group and
press [ENTER].
≥You can select more than one group.
2 Press [1] (PLAY).
Play now begins in random order.
To clear a group [DVD-A]
Press [2, 1] to select the group you want to clear, then press [ENTER].
All disc random play [CD] [VCD]
To play tracks on all discs randomly
Press [1] (PLAY).
Play now begins in random order.
≥DVD and MP3 discs are skipped during all disc random play.
Press PLAY to start
All Group Playback
Choose a group or groups.
All 1 2 3
Random Playback
0 Press PLAY to start
ENTER
RETURN
SELECT
All group play/Program play/Random play/All disc random play
Program play
To play a maximum of 24 tracks in a programmed order
[DVD-A] Select tracks from the disc in the play position.
[CD] [VCD] Select tracks from any disc.
e.g. [DVD-A]
1 [DVD-A]
Press the numbered buttons to select
a group.
[CD] [VCD]
Press [DISC] and [1]–[5] to select the disc.
2 Press the numbered buttons to select
a track.
≥Repeat steps 1 and 2 to program other tracks.
≥[CD] [VCD]
Step 1 is unnecessary when programming tracks on the same disc.
≥[DVD-A] To select a track using the cursor buttons
Press [ENTER] and [3, 4] to select a group or track, then
press [ENTER] again to register the number.
All the tracks in the selected group are selected when you
select “ALL”.
3 Press [1] (PLAY).
Play now begins in the programmed sequence.
When play is stopped and the program contents are shown on
the display, you can also do the following.
≥To add tracks
Repeat steps 1 and 2.
≥To check program contents
Press [
:] or [9
].
≥To clear tracks
Press [CANCEL] to clear the last track in the program, or press
[
:] or [9
] to select a track and press [CANCEL].
≥To clear the whole program
Press [∫] so “CLEAR” is displayed. (If “CLEAR” is not displayed,
start and stop play, then press [∫] again.)
[DVD-A] (Follow the on-screen instructions.)
To add or change groups or tracks
Press [3, 4] to select an available item, then repeat steps 1 and 2.
To move to the page before or after the one shown
Press [
6] or [5
].
To clear a track
1. Select the item you want to clear.
2. Select “Clear” with [
3, 4, 2, 1
] and press [ENTER].
To clear the whole program
Select “Clear all” with [
3, 4, 2, 1
] and press [ENTER].
Note
Groups, discs or tracks the unit cannot find can be programmed but are
canceled during play. This is also the case if you program
DVD-Audio,
DVD-Video and MP3 discs
.
Normal play
The play mode is canceled (normal play mode is restored) when:
–The unit is turned off.
–The disc is changed or removed.
–A source other than DVD/CD is selected.
[CD] [VCD]
The program is retained in memory.
DISC
PRGM
RANDOM
RANDOM
ALL DISC
PLAY MODE
ENTER
RETURN
6 ∫ 1
5
Choose a group and track, then press ENTER.
No Time
G
Total Time
0 Press PLAY to start
T
Play
Clear
Clear all
0:00
SELECT
1