Filter
Top Products
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu func-
tion.
Once selected, the following initial menu func-
tions can be adjusted.
SP-P/O MODE(rear output and preoutsetting)
The rearspeaker leads outputand the RCA output
of this unitcan be usedto connect afull-range
speaker orsubwoofer. Select asuitable option for
your connection.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
You can selectany one ofthe options inthe fol-
lowing list:
! REAR/SUB.W –Select when thereis a full-
range speakerconnected to the rearspeak-
er leadsoutput and thereis a subwoofer
connected tothe RCA output.
! SUB.W/SUB.W –Select when there isa
subwoofer connecteddirectly to therear
speaker leadsoutput without anyauxiliary
amp andthere is a subwooferconnected
to theRCA output.
! REAR/REAR –Select when thereis a full-
range speakerconnected to the rearspeak-
er leadsoutput and the RCAoutput.
If there isa full-range speakerconnected to
the rearspeaker leads outputand the RCA
output isnot used, you mayselect either
REAR/SUB.Wor REAR/REAR.
S/W UPDATE(updating the software)
This functionis used to updatethis unit withthe
latest Bluetoothsoftware. For about Bluetooth
software and updating,refer to our website.
! Never turnthe unit offwhile the Bluetoothsoft-
ware isbeing updated.
1 Press M.C. todisplay the datatransfer mode.
Followthe on-screen instructionsto finish up-
dating theBluetooth software.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
4 Turn M.C. to select the system menu
function.
Once selected, the following system menufunc-
tions can be adjusted.
For details, referto System menu on page 13.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless theauxiliary set-
ting is turned on. For more details, refer to AUX
(auxiliary input) on page 14.
Switching the display
Selecting thedesired text information
1 Press DISPto cycle between thefollowing:
! Source name
! Source nameand clock
If an unwanted display appears
Turn off the unwanted display using the proce-
dures listed below.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to display DEMO OFF and press
to select.
4 Turn M.C. to switch to YES.
5 Press M.C. to select.
Operating this unit
16
Section
Operating this unit
En
02
<QRD3123-A/N>16