Filter
Top Products
3 Turn M.C. to display PHONE COLOR and
press to select.
4 Turn M.C. to select the illumination color.
You can select any one of the options in the fol-
lowing list:
! FLASHING –The color selectedfrom
KEY COLORflashes.
! FLASH MODE1to FLASH MODE6– The sys-
tem automaticallycycles through allavailable
key colorsfor this unit.Select the desired
mode.
! OFF –No change in keycolor made whenin-
coming callsare received.
Switching the dimmer setting
You can adjust the brightness of illumination.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display DIMMER and press
to select the desired setting.
OFF (off)—ON (on)
! You can alsochange the dimmersetting by
pressing andholding
/DIMMER.
Customizing the
illumination color
Only for DEH-X6500BTand DEH-X65BT
You can create custom illumination colors for
both KEY COLOR and DISP COLOR.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display KEY COLOR or
DISP COLOR. Press to select.
4 Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5 Press M.C. to select the primary color.
R (red)—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot selecta level below20 for all threeof
R (red),G (green), andB (blue) at thesame time.
# You can alsoperform the sameoperation on
other colors.
Note
You cannot create a custom illumination color
while SCAN, WARM, AMBIENTor CALM is se-
lected.
About MIXTRAX
Only for DEH-X6500BTand DEH-X65BT
MIXTRAX technology is used to insert avariety
of sound effects in between songs, allowing you
to experience your music as a nonstop mixcom-
plete with visual and lighting effects.
Notes
! Depending on the file/song, sound effects
may not be added.
! MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns theflash-
ing colors on and off in time withthe audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAXbutton on page 6.
MIXTRAX menu
Only for DEH-X6500BTand DEH-X65BT
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabledwhen
MIXTRAX is on.
SHORT PLAYBACK(short playbackmode)
You can selectthe length of theplayback time.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
1.0MIN (1.0minute)—1.5MIN (1.5minutes)—
2.0MIN (2.0minutes)—2.5MIN (2.5minutes)
—3.0MIN (3.0minutes)—OFF (off)
! Turn thisoption OFF ifyou want toplay a selec-
tion allthe way through fromstart to finish.
FLASH AREA(flash area)
You can selectareas for flashing colors.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
KEY/DISPLAY (keyand display)—KEY (key)—
OFF (off)
! When OFFis selected, thecolor set underIL-
LUMI isused as the displaycolor.
FLASH PATTERN (flashpattern)
You can selectflashing color patterns.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
You can selectany one ofthe options inthe fol-
lowing list:
! SOUND LEVEL1 to SOUND LEVEL6 –
Flashing colorswill flash on andoff in syn-
chronization withthe sound level ina
song. Selectthe desired mode.
! LOW PASS 1to LOW PASS6 – Flashing
colors willflash on and offin synchroniza-
tion withthe bass level ina song. Select
the desiredmode.
! RANDOM 1– The patternfor the flashing
colors israndomly selected fromthe sound
level modeand low passmode.
! RANDOM 2– The patternfor the flashing
colors israndomly selected fromthe sound
level mode.
! RANDOM 3– The patternfor the flashing
colors israndomly selected fromthe low
pass mode.
DISPLAY FX(display effect)
The MIXTRAXspecial effects displaycan be turned
on oroff.
1 Press M.C. toselect the desiredsetting.
ON (MIXTRAXspecial effects display)—OFF
(normal display)
CUT INFX (manual cut-ineffect)
You can turnon or off theMIXTRAX sound effects
while manuallychanging tracks.
1 Press M.C. toselect the desiredsetting.
ON (on)—OFF(off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
English
Operating this unit
15
Section
Operating this unit
En
02
<QRD3123-B/N>15